New design laminating machine DW3-1600 for Paper, Spray painting, graphic printout, photo studio,

New design laminating machine for paper DW3-1600 

Main Produce Features:

1, particular function of 6 kinds of film rollers . no need change the different film always

2, Single or double sides laminating process. Convenient for your choice

3, Hot and cold laminating function in single one machine. Easy to suit different materials

4, Automatically laminating, easy to operate.

5, Heating way is heating element infrard . easy to control the temperature. no damage of the rubber roller.

6, Automatic laminating, and foot-propelled-switch two ways of laminating

7, Single man operation. saving the labor cost

8,Single side control the working roller height. easy to raise or down

9, Heating up to 100degree. depends on the thermal film, only Cost $0.1 per square

10, Heating up to 60degree for cold laminating  could fully avoid the bubble or snowflake points

11, The effect and the rate of finished products is very high. 50m laminating material in one roll, no any slope

12, Automacally releasing the back paper/waste paper. Automatically collecting the finished product

13, Imported rubber roller. Diameter up to 130mm. High thermostability , good flexibility , Long lifetime

This laminator specially is used for surface post-processing on Spray painting, graphic printout, photo studio, printing industry, building materials industry, PVC sheet, acrylic, tiles, glass, wooden doors etc. fields. It is developed as a easy to use, energy-saving, low-cost laminator

Laminate the film on the surface of the material. It’s a good protection for the materials and images. So the materials could not be scratched and damaged. When using the cold function, please use the cold film. when using the hot function, please use the hot film.

 2. Main Technical parameters

1), Rated voltage: 220V

2), Frequency: 50HZ-60HZ

3), Length of rubber roller: 1600mm

4), Laminating/Coating width: ≤1580mm

5). Laminating/Coating speed: 0.4~3.2m/min

6). Coating temperature: 0°C~60°C

7), Preheating time: 30min

8), Thickness of operating materials: 0.1~35mm

9), Thickness of suitable film: 25~250mic

10), Motor powder: 90W

11), Speed gear control: 10

12), Heating roller elevation height: 40mm

13), Pressure adjustment method: Manual

14), Automatic removing film and rewinding the backing paper device: Motor

15), Gross weight: 170kg

16), Dimensions:  2040*700*680mm  

17) Diameter of roller: 130mm

3,Wide range of application:

Be suitable for Photo album .poster, image-text printing ,Photo image, silk screen printing

X-frame show image.

apply to the cold lamination / hot lamination of the large area of the

PVC board , KT board and also be the protection film of the plates ,glass, section bar ,acrylic ,and wood door etc.

4, Other kinds of laminators for sale

5, Packing

We factory offer OEM service!

 any question,pls contact us directly Or add my skype:emma-wind1

Looking forward to hearing from you soon !