carbon fiber Compression molding OEM products

Specifications

1. carbon fiber flat sheet
2. CNC machined
3. Factory directly made
4. light weight, high strength

Welcome to our company website:

 

Item Name:Customer  Carbon fiber parts  (including CNC machined)

 

 

Carbon-fiber-reinforced polymer, carbon-fiber-reinforced plastic or carbon-fiber reinforced thermoplastic (CFRP, CRP, CFRTP or often simply carbon fiber), is an extremely strong and light fiber-reinforced polymer which contains carbon fibers. The polymer is most often epoxy, but other polymers, such as polyester, vinyl ester or nylon, are sometimes used. The composite may contain other fibers, such as aramid e.g. Kevlar, Twaron, aluminium, or glass fibers, as well as carbon fiber. The strongest and most expensive of these additives, carbon nanotubes, are contained in some primarily polymer baseball bats, car parts and even golf clubs^[1] where economically viable. Carbon fiber is commonly used in the transportation industry; normally in cars, boats and trains

 

Although carbon fiber can be relatively expensive, it has many applications in aerospace and automotive fields, such as Formula One. The compound is also used in sailboats, rowing shells, modern bicycles, and motorcycles, where its high strength-to-weight ratio and very good rigidity is of importance. Improved manufacturing techniques are reducing the costs and time to manufacture, making it increasingly common in small consumer goods as well, such as certain ThinkPads since the 600 series, tripods, fishing rods, hockey sticks, paintball equipment, archery equipment, tent poles, racquet frames, stringed instrument bodies, drum shells, golf clubs, helmets used as a paragliding accessory and pool/billiards/snooker cues.

 

 

Compression molding

A quicker method uses a compression mold. This is a two-piece (male and female) mold usually made out of fiberglass or aluminum that is bolted together with the fabric and resin between the two. The benefit is that, once it is bolted together, it is relatively clean and can be moved around or stored without a vacuum until after curing. However, the molds require a lot of material to hold together through many uses under that pressure.

 

1.factory direct made
2. high strength, light weight
3. long use-life
4.Corrosion Resistance