S-150-5 150W 5V DC switching power supply

Model Specification

S-150-5V

S-150-7.5V

S-150-9V

S-150-12V

S-150-13.5V

S-150-15V

S-150-24V

S-150-27V

S-150-48V

DC Output Voltage

5V

7.5V

9V

12V

13.5V

15V

24V

27V

48V

Iutput Voltage Error

± 2%

± 1%

± 1%

± 1%

± 1%

± 1%

± 1%

± 1%

± 1%

Rated Output Current

30A

20A

16.7A

12.5A

11.2A

10A

6.5A

5.6A

3.2A

Output Current Range

0-30A

0-20A

0-16.7A

0-12.5A

0-11.2A

0-10A

0-6.5A

0-5.6A

0-3.2A

Tripple and Noise

150mVp-p

150mVp-p

180mVp-p

180mVp-p

180mVp-p

180mVp-p

240mVp-p

240mVp-p

240mVp-p

Iniet Stability

± 0.5%

± 0.5%

± 0.3%

± 0.3%

± 0.3%

± 0.3%

± 0.2%

± 0.2%

± 0.2%

Tolerance Voltage

± 0.5%

± 0.5%

± 0.3%

± 0.3%

± 0.3%

± 0.3%

± 0.2%

± 0.2%

± 0.2%

DC Output Power

150W

150W

150.3W

150W

151.2W

150W

156W

151.2W

153.6W

Efficiency

78%

80%

80%

82%

83%

84%

85%

86%

87%

Adjustable Range for DC Voltage

4.5-5.5V

6-8.3V

8-10.4V

10.6-13.2V

12-15V

13.5-16.5V

21-28V

24-30V

43-53V

AC Input Voltage Range

85~132VAC/170~264VAC selected by switch 47~63Hz; 240~370VDC

Input Current

3.2A/115V 1.6A/230V

AC Inrush Current

Cold-Start Current: 35A/115V, 60A/230V

Leakage Current

<3.5mA/240VAC

Overload Protection

105%~150% Type: Cut Output, Reset: Auto Recovery

Over Voltage Protection

…………

High Temperature Protection

…………

Temperature Coefficient

± 0.03% /°C (0~50°C)

Start, Rise, Hold time

100ms, 50ms, 20ms

Vibration

10~500Hz, 2G 10min,/1cycle, a total of 60 minutes, Each axes

Withstand Voltage

Between Input and Output: 1.5KVAC, Input and Shell: 1.5KVAC, Output and Shell: 0.5KVAC

Isolation Resistance

Input and Output Intermal: Input and Enclosute, Output and Enclosure: 500VDC/100M Ohms

Working Temperature and Humidity

`-10°C~+60°C (Refer to Output Derating Cutve), 20%~90%RH

Storage Temperature and Humidity

`20°C~+85°C, 10%~95%RH

Overall Dimension

199*110*50mm

Weight

0.8kgs

Safety Standards

CE

EMC Standards

Meet FCC Part 15J Conduction class B

1. The testing condition for the parameter above is: 230VAC input, rated load, 25°C 70%Rh, Humidity.

2. Error, include the setting error, line stability and load stability.

3. Wave test: adopting "A12" double wire for 20MHZ, and 0.1uF&uF capacitor short-circuit for interrupting.

4. Inlet Voltage Stability test: when is over load, the lowest voltage of inler is representative to the highest voltage.

5. Load stability test: the load is from 0% to 100%, others 60%.

6. C2,3,11 must be knocked down.