HI-Q Handrail step ladder

Specifications

1.Wide step, stable, with handrail and tool basket
2.Safety and convenience
3.no welding,no rust
4.strong ability of insulat

We are one of the most professional factory specializing in producing and supplying FRP ladders, extension ladders, and Aluminium ladders.We can produce all kinds of ladders depending on your drawings or sample.

Our main FRP ladders are Single side fiberglass ladder, double size fiberglass ladder and FRP extension ladder.

  

Top cap width	325mm
Foot width	522mm
Full assembled ladder closed  length	1575mm
Full assembled ladder closed thickness	145mm
Measurement	0.097m3
Full assembled ladder open high	1438mm
Full assembled ladder open width	914mm
N.W/SET	6.15kg
G.W/SET	7.15kg
load rating	102kg
Qty/20GP(set)	350
Qty/40GP(set)	710
Qty/40HQ(set)	800

All our FRP ladders are made to EN131, which is very popular style in the market. Our ladders has exported to so many countries, such as Canada, America, Brazil, Peru, Britain, Argentina, Ireland, etc.,and very popular there.

Proper Care

A thorough inspection must be made when the ladder is initially purchased and each time it is placed into service. Clean the climbing and gripping surfaces if they have been subjected to oil, grease or slippery materials. Working parts, bolts, rivets, step-to-side rail connections, and the condition of the anti-slip feet (safety shoes) shall be checked. If structural damage, missing parts, or any other hazardous defect is found, the ladder must not be placed into service and either discarded or competently repaired.

Ladders exposed to excessive heat, as in the case of fire, may have reduced strength. Similarly, ladders exposed to corrosive substances such as acids or alkali materials may experience chemical corrosion and a resulting reduction in strength. Remove these ladders from service.

Ladders with bent or broken side rails must be destroyed.

In the event a ladder is discarded, it must be destroyed in such a manner as to render it useless. Another person must not be afforded the opportunity to use a ladder that has been deemed unsafe.

When transporting ladders on vehicles equipped with ladder racks, the ladders must be properly supported. Overhang of the ladders beyond the support points of the rack should be minimized. The support points should be constructed of material such as wood or rubber-covered pipe to minimize the effects of vibration, chafing and road shock. Securing the ladder to each support point will greatly reduce the damaging effects of road shock.

Storage racks for ladders not in use should have sufficient supporting points to avoid sagging which can result in warping the ladder. Other materials must not be placed on the ladder while it is in storage.

More details please contact us