Air pressure gauge tester tool for auto vehicle motorcycle tyre tool motorcross car tractor

Air pressure gauge tester tool for auto vehicle motorcycle tyre tool motorcross car tractor

1. Product introduction
This product is a portable car tire pressure measuring tools. Pressure is the most important indicator of tires, too high or too low pressure shortens the life, and even dangerous. Tire pressure monitor at any time in order to ensure the safety and reducing the risk of bursting of accidents for tires.
2. tire pressure monitoring principled
High precision pressure sensor device can handle a fair-time data acquisition for the band, after ad module is converted into digital signal and processed by mcu (central control), after the measured data is displayed on the LCD screen.
3. how to know the normal car tire
According to the different model or different makes of car, tire standard is definitely different. In general, it can be found by the following:
A. Car manual;
B. The tag on the side of the cabin door (close to b-pillar);
C. The drawer of the cabin door;
D. The small door of the fuel tank;
E. Car tire pressure is close to the door pillar or on the fuel tank cap or on the side of the co-pilot's door
4. appearance and function

1. pressure sensor valve
2. LCD display
3. pro
4. hook
5. How to use the tire gauge
1. Press the button to start digital tire pressure gauge, then press again to select pressure unit psi, bar, kPa.
2. addresses the gauge valve valve, press down the power to ensure no leakage, and take two or three seconds, the LCD displays the tire pressure values.
3. again when you need to test, long press the button for 3 seconds to turn it off, and then restart the gauge and select a pressure unit
4. Once you finished the measuring work, long press the button for 10 seconds to turn it off, or wait for 1 minute off automatically
6. pneumatic unit conversion table

7. parameter
...................................... Working voltage: 3V
Pressure unit .................. ..................: psi, kpa, bar
Resolution .................. .......................: 0.5 psi / kpa 5 / 0.05 bar
Measuring range ............... .................: 3-100psi
Temperature accuracy .............................: 3 100 psi and ± 1.5 psi
Working temperature ............................... - 0 ~ 50
Automatic to turn off the time ......... .........: to switch off 50s, 30s to turn off backlighting
Power .................................: work under less than 1.2mA; Standby barely 5uA below
Battery capacity ....................................... 180 mah
............................................ Working time: 150 hours
Standby time ............................................. 1500 days
8. attention
1. Do not place the device in liquid or exposed to humid environment
2. Do not wash device by corrosive liquid
3. do not exposure of the device in the higher temperature
4. Do not rub the device with sharp objects, not to damage surface and scars
5. Do not force separate device, making the internal components can;
6. do not if you use the device for a long time, keep it in a dry (not extremely high or low) environment, away from moisture and dust