Blower wheel WL23LD

Specifications

1, Volume rotary blowers
2, widely applied to many industrial fields
3, easily maintenance
4, safty and reliable

L      X  Y     W/L   D – 1       

 

 1---                          Design SN

 D---                         Drive Mode: D- Coupling dire; Coupling transmission;C- Pulley-Drive

 W/L---                     Construction: W- horizontal type; L- vertical type

 X---                          Length of Impellers (cm)

 Y---                          Diameter of Impellers (cm)

 L---                           Blowers Code Name

 

Impeller-diameter: 150mm

Impeller-length: 235mm

 

Operational Principle

Two rotors driven by a pair of synchronizer gear, rotating at a constant speed in reversal direction, with help of insulation between suction chamber and discharge chamber supplied by a proper working gap between both impellers and between impeller and casing, then push the internal gas so as to realize functioning of exhausting.

 

Configuration

Rotors: compose of shaft, impeller, bearing, synchronizer gear, coupling, shaft collar, etc.

Impeller: involute type; high volume efficiency

Bearing: Double-row angular-contact ball bearings for Model 3000;

        And single-row radial short cylindrical roller bearings for Model 32000 can be 

        adapt to axial shift of rotors caused by thermal expansion.

Synchronizer gear: compose of gear ring and gear hub for easily adjust the working gap.

Casing: compose of cabinet, right and left wall-plate, on which there’re bearing pedestal, sealing parts and etc. They are in common use.

Base: Common bases for middle and small blowers and only bases for large blowers.

Lubrication: immersion for gearwheel and splash lubrication for bearings.

Driving Method: flexible coupling is an important part in it and has the function of impact alleviating and compensation to axial-deviation.

 

 

Features

 

Roots blowers, classified into category of positive displacement rotary one are typically characterized by following features in practical operation:

 

(1)   Flow fluctuating slightly while pressure is varied within allowable range.

 

(2)   A wide range for selecting pressure.

 

(3)   Transmitted air is free from oil.

 

(4)   Simple configuration.

 

(5)   Easy maintenance.

 

(6)   Long service life.

 

(7)   Slightly vibration.

 

Performance

 

Model	RPM	Boost Pressure      Kpa (mm H2O  )	Flow M3/min	Motor		Weight                 kg (without motor)
				Model	Power     kw
L11WD (150x235)	1450	9.8 (1000)	4.49	Y90L-4	1.5	190
		19.6 (2000)	4.32	Y100L-2	3	190
		29.4 (3000)	4.03	Y112M-4	4	190
		39.2 (4000)	3.76	Y132S-4	5.5	190
		49 (5000)	3.53	Y132M-4	7.5	190
	2950	9.8 (1000)	10.9	Y100L-2	3	190
		19.6 (2000)	10.8	Y132S1-2	5.5	190
		29.4 (3000)	10.5	Y132S2-2	7.5	190
		39.2 (4000)	10.2	Y160M1-2	11	190