220V flame sensor module with 50cm long lead flame detection direct control of 220V AC load

AC 220V voltage supply, stable version with 50cm long lead flame sensor module

This power supply for AC 220V voltage,Need to be cautious.

Use:
All kinds of flame, fire source detection, 1 way relay output, can be connected to the 220V large current equipment
Module features:

1, can detect flame or wavelength in the range of 760 nm to 1100 nm light source, lighter test flame distance is 80cm, the greater the flame, the farther the test distance

2, AC 220V power input switching power supply voltage reduction module, providing the sensor comparator, so that the product is more stable and reliable;

3, detection angle of 60 degrees or so, the flame spectrum is particularly sensitive
4, the sensitivity is adjustable (blue digital potentiometer adjustment)
5, the comparator output direct trigger relay
6, the size of the shape: 6043mm, thick 19mm, with a fied bolt hole, easy to install
1, 7 output with blue terminal block, wiring convenient

Module instruction:
1, flame sensor is the most sensitive to the flame, the sun is also a reaction to the general use of fire alarm and other purposes.
2, by adjusting the potentiometer, you can set the intensity of the flame sensors, when the flame eceeds a set threshold, relay, a public end and often start connected, when the flame is lower than the set threshold, relay disconnect, public ends with the normally closed terminal is connected;
3, the public side, normally open, normally closed three ports is equivalent to a double control switch, relay coil power, the public and often start conducting, without electricity, the public and the normally closed end;,
4, the sensor and the flame to maintain a certain distance, so as to avoid high temperature damage to the sensor, the flame of the test flame distance of 60cm, the greater the flame, the farther the test distance

Electrical parameters:
Power supply voltage:AC 220VCurrent: more than 100mA
Load: 10A 250V AC or 10A 30V DC

Delivery list:
1 way 220V flame sensor plus relay module 1,Long lead wire with 50cmflameOne article.

Sensor plus relay module wiring diagram:

The relay output terminal pin is stated as follows:

Relay module control AC equipment wiring diagram:

Relay module control DC equipment wiring diagram:

Matching bo, you need to be able to open the following link to buy

/item.htm?spm=a1z10.3.17.13.e49c01&id=20018268123&

Statement:This power supply for AC 220V voltage,Modification ofRisk, the need to be cautious, the need for a certain modification of the electronic circuit. This shop is not responsible for any problems or damage caused by the modification.