WINSUN 1 24V self-locking relay module single bistable switch 24V high level trigger relay module

The outer contact of the module is the high level trigger mode, the trigger signal can be 5V to 24V high level trigger signal and the key switch signal.

Default for no eternal contact,Need to contact the hair line of friends, please click the link below to buy:

/item.htm? Spm=2013.1.w2817858303580.31.9ED2cc&id=17488729606?

Product use:
Press the trigger button, corresponding relay lock, press, relay disconnect can also be eternal trigger switch, and the high level trigger.

Product features:
1 the design of double face plate PCB;
2 stable and reliable chip is used to control, stable and reliable performance, strong anti-interference ability, will not trigger, the performance is far superior to CD4013;
3 with high power supply voltage regulator tube to provide sufficient and stable voltage, and has enough cooling holes, to ensure that the product long time stable and reliable work;
4 with anti - power supply connected to anti - protection diodes, short - time power supply to the product without any damage to the product;
5 the use of pine music authentic relay control load, in the 10A 250V (AC) and 10A 30V (DC) under the load can bear;
6 trigger can also be eternal trigger switch, the product is equipped with a wiring seat and lead, more convenient to use;
7 trigger can also be used to trigger other sensor modules, as long as the 5-24V high level trigger are effective, the function has more etensions;

Relay output contact with double - line, can withstand large current more secure
Electrical parameters:
Supply voltage: 6-24V (DC) supply current: more than 100mA
Load: 10A 250V (AC) or 10A 30V (DC)
Life: 1 million times
Product instruction:
1 power supply should be in accordance with the scope of use, DC6-24V;
2 power supply according to the requirements of the line, can not be reversed, although there is a protective circuit, but not a long time to reverse;
3 products using a voltage regulator tube is a slight fever, is a normal phenomenon, the relay for a long time to work there are normal heating phenomenon, is a normal phenomenon;
4 load power to give the relay load has a certain margin, should avoid high power (2000W) and a long time working environment, the product life will have a certain impact.
List of hair:
124V1

1 way 24V self locking relay module wiring diagram:

The relay output terminal pin is stated as follows:

The above relay method is equivalent to the following control circuit

Relay module control DC equipment wiring diagram:

Matching bo, you need to be able to open the following link to buy

/item.htm?spm=a1z10.3.17.13.e49c01&id=20018268123&