single pointed, triple pointed, square tops or round and notched tops Hot Dip Galvanised palisade fencing

Specifications

Galvanised palisade fencing
1.steel tubular palisade fences
2.easy and quick installation
3.beautiful and practical
4.SGS CE

 

 

1. single pointed, triple pointed, square tops or round and notched tops Hot Dip Galvanised palisade fencing 

 

A strong and durable construction providing excellent protection against climbing  and cut-through, Cheap Palisade

Fencing is a cost effective way to  providing  a  high  level  of security  to  the boundary  line of any property. Cheap

Palisade Fencing is a very popular choice of fencing in commercial applications, industrial units and  schools. The

reason behind this popularity is due to the  simple yet robust design of steel  palisade fencing.   This makes Cheap

Palisade Fencing both highly vandal resistant and difficult to damage.Due to the sharp options available of the steel

palisade palings it can be extremely difficult to climb.Both cost effective an d secure,Cheap steel Palisade Fencing 

is a good all round security fencing system.

 

Cheap Palisade Fencing  is designed to be a strong and durable construction and Cheap Palisade Fencing provides

excellent protection against climbing and cut-through. Cheap Palisade Fencing is available with either  a  ‘D’ or  a ‘W’ 

pale profile to varying  specifications including specials  for Gas,  Water & Electric Companies, and the Public Sector.

All of Cheap Palisade Fencing supplied by Premier Fencing is designed to comply with BS 1722 Part 12,plus,contact

us for information on the ULTIMATE CHEAP PALISADE FENCING.

single pointed, triple pointed, square tops or round and notched tops Hot Dip Galvanised palisade fencing  – D Pale Triple Point

 

2. Heights Available for  single pointed, triple pointed, square tops or round and notched tops Hot Dip Galvanised palisade fencing 

1.2m, 1.5m, 1.8m, 2m, 2.1m, 2.4m and 3m heights are available. Plus, heights of 3.6m and greater are

available on special request

single pointed, triple pointed, square tops or round and notched tops Hot Dip Galvanised palisade fencing   – available for ‘D’ and ‘W’ Pales

 

3. Paling tops of single pointed, triple pointed, square tops or round and notched tops Hot Dip Galvanised palisade fencing 

 

Can be single pointed, triple pointed, square tops or round and notched tops.

single pointed, triple pointed, square tops or round and notched tops Hot Dip Galvanised palisade fencing   – Grey Powdercoated

single pointed, triple pointed, square tops or round and notched tops Hot Dip Galvanised palisade fencing   – Hot Dip Galvanised

 

 

4.Horizontals of  single pointed, triple pointed, square tops or round and notched tops Hot Dip Galvanised palisade fencing 

 

Available in 4 standard sizes according to height and site requirements: 40×40, 45×45, 50×50 and 65×50.

 

 

5. Posts of  single pointed, triple pointed, square tops or round and notched tops Hot Dip Galvanised palisade fencing 

Available with welded fish plates or slotted,  complete  with  loose  fish  plates that can be concreted-in,  

base plated for bolting down or cranked.Posts can be vertically extended to take barbed

orazor wire.Posts are generally 102 x 44mm RSJ (or 100×55),increasing to 127 x 76mm,

recommended for fences above 2.7m.

 

Typical 2m high palisade fencing supplies

 

6. Panels of  single pointed, triple pointed, square tops or round and notched tops Hot Dip Galvanised palisade fencing 

Standard panel sizes of 2750mm (post centres) are freely available at short notice from Steel

Palisade manufacturer’s stock of all standard heights.  Panels can be easily raked

to allow for most site conditions.

Fixings

All fixings are anti-vandal and are generally supplied hot dip galvanised.

 

 

7. Advantages of  single pointed, triple pointed, square tops or round and notched tops Hot Dip Galvanised palisade fencing 

While D section palisade fencing provides effective medium level of security, a W section steel  palisade fence provides

more  protection  and  offers an  even greater  resistance  to  attack.  This  is  due to the simple nature of how the profile

interacts with the horizontal rail, as shown below:

 

D Pale Vs W Pale

 D Pales—Available in 2.5mm, 3mm and 3.5mm

Use longer bolts , with bolt heads that may be exposed to attack. Plus there is flexibility between the pale fixing

and the horizontal rail.

 W Pales— Available in 2mm, 2.5mm and 3mm.

Use shorter  bolts and the pale sits flush against the horizontal rail. No flexibility provides a more secure fixing.

 

 8. Basic Specifications of  single pointed, triple pointed, square tops or round and notched tops Hot Dip Galvanised palisade fencing 

 

Two horizontal rails are used as standard for palisade fences up to 3m in height.Additional rails can be fitted onto fences of

any height, but above 3m high, this will be necessary to ensure the integrity of the fence. The 3rd rail is usually fixed at the

bottom of the fence to provide the additional rigidity, without providing a climbing option.

Triple pointed security pales are usually supplied as standard above 1.8m high,depending on the specific requirements,and

safe notched and rounded tops are standard below that height and for schools and other applications where  security needs

to be tempered with safety concerns. The other profiles are available upon request.

 

9. Packing and Shipping of  single pointed, triple pointed, square tops or round and notched tops Hot Dip Galvanised palisade fencing