Jinma Made Stone Primary Crusher in Stock

Standard packing, Seaworthy packing, or as required.

Specifications

Crusher in Stock
-Reasonable and multiple match jaw
-Easy to setup,operate
-Best aftersale service
-High reliability.

Features of Jaw Crusher, Crusher Machine: 

1. Crushing the ores,rocks ,pressure below 320 MPa 
2. Hard rocks of high erosion 
3. Used in mining,building,chemical field

4. Crushing with Less machine stop time 
5. Low cost 
6. Long service life 
7. Primary crusher, simple structure 
8. Strong construction

9. High crushing ratio;

10. Easy maintenance;

11. Stable performance;

12. Even final products.

 

Jaw Crusher,crusher machine working principle:

The jaw crusher squeezes rock between two surfaces, one of which opens and closes like a jaw. Rock enters the jaw crusher from the top. Pieces of rock that is larger than the opening at the bottom of the jaw lodge between the two metal plates of the jaw.

 

Characteristics of Jaw Crusher

The characteristics of jaw crusher, jaw crusher in the use of building materials and mines are frequent, mainly because it is the complete model, performance is also very stable, production is also very large, so we evaluated this product are high, jaw crusher in mining, building materials and infrastructure sectors is mainly used for crushing machine and the broken machine. According to the discharge port width size, divided into large, medium and small three, to more than 600MM width of entrance and exit for the mainframe, to the discharge port 300-600MM width for medium-sized machine, to the discharge port is smaller than the width of the 300MM the minicomputer.

 

Jaw Crusher is partly the work of two jaw plates, one fixed jaw plate (fixed jaw), vertical (or the top of the slightly extrovert) fixed to the body before the wall, and the other is the active jaw plate (moving jaw), location tilt, with the fixed jaw plate under the formation of small, big crushing chamber (the working chamber.) Activities against the fixed jaw jaw board to do the periodic reciprocating motion, sometimes separately, sometimes close. Separately, the material into the crushing chamber, finished unloading from the bottom; close, so that jaw plate mounted between the two materials are extruded, the role of bending and splitting broken.

 

Jaw crusher technical parameters:

Model	Max feed size (mm)	Discharge opening (mm)	Capacity  (TPH)	Power (KW)		Mainshaft speed(r/min)	Weight (T)
PEF-150×250	125	10-40	1-3	Y2-132S-4	5.5	285	0.7
PEF-200×300	180	20-70	2-8	Y2-160M-4	11	285	0.8
PEF-250×400	210	20-80	4-14	Y2-180L-6	15	310	2.8
PEF-400×600	350	40-160	20-120	Y2-250M-8	30	300	6.5
PEF-500×750	425	50-100	40-110	Y2-280M-6	55	275	11.3
PEF-600×900	480	72-200	56-192	JR117-8	75	255	17.6
PEF-750×1060	630	80-200	100-250	JR117-8	90	250	29
PEF-900×1200	750	95-200	120-280	JR117-8	110	250	50
PEF1000×1200	850	110-260	180-340	JR117-8	130	200	53
PEF1200×1500	1020	150-300	300-500	JR117-8	160	180	101
PEX-150×750	120	8-25	10-40	Y2-180L-6	15	300	3.5
PEX-250×750	210	12-35	15-50	Y2-280S-8	30	300	5.5
PEX-250×1000	210	12-50	30-95	Y2-250M-8	37	300	6.5
PEX-250×1200	210	12-50	40-100	J2-280M-8	37	300	8.8
		12-70
PEX-350×750	300	15-50	20-50	Y2-315M-8	30	250	6.5
PEX-300×1300	250	20-90	45-130	Y225M-6	75	250	11

Note: This specification is just for reference, any changes are subject to the products.

Tracy Xie

Zhengzhou Jinma Mining Machinery Co., Ltd. 

Tel: 86-371-67511065     Fax: 0086-371-67512579

Mobile:86-150-382-13376

Website:

Skype: asdfg200037