ZX-DM(300C)High Quality Electronic Microscope Eyepiece, Microscope Accessory

ZX-DM(300C)High Quality Electronic Microscope Eyepiece, Which is Suitable for All kinds of Microscope

Description:

ZX-DM (300C) 3 million pixel multi-function electronic eyepiece is research and development from our own company, in order to meet the needs of customers, through the product can be directly retrofitted to existing binocular optical microscope escalate into video digital microscope, the eyes have liberated from the eyepiece, to achieve digital observation, photography, alleviate eye fatigue, at the same time, saving the equipment cost, improve product quality and cost, realize the full range of observation requirements for customers. Electronic eyepiece Interface: 23.2mm, 30mm, 30.5mm, which can be equipped with binocular stereoscopic, metallurgical and biological microscopes, welcome to enquiry!

Standard configuration for the 3 million USB camera, optional 500 and 1000 megapixel camera, in addition, USB interface chip CCD camera series can be optional.

Product Features: The monocular / binocular optical microscope directly converted into a digital microscope, optical image can be transferred directly to a computer to observe, photograph, storage and measurement, so many people can observe the image on the computer for the same time.

Product Configuration: 0.5X electronic eyepiece switch interface contains three kinds of port size (23.2mm / 30.0mm / 30.5mm), microscope camera (standard of CMOS 3 million pixels, and optional CMOS 5 million pixels / CMOS10 million pixels); 0.1mm / 0.01mm microscope specific correction straightedge for each one; software and drivers for each.

Instructions: Remove the existing microscope eyepiece, 0.5X switch interface will set into the eyepiece, the universal is 23.2mm standard interfaces, such as interface is 30.0mm or 30.5mm, it will switch interface set in the eyepiece and insert 0.5X eyepiece, connect the camera and the USB cable, install the drivers and after the procedure of observation, photographs, video and measurements.

Electronic eyepiece sets are including:

1. 0.5X transform interface, 23.0mm/30.0mm/30.2mm 3 kinds of interface.

2. 1 set of 300C professional 3MPX microscope camera.

3. 1 set of video camera with measurement software.

4. 1 set of software driver.

5. 1 piece of 0.1mm/0.01mm straightedge.

6. 1 piece of USB cable.