Home > Products > laser distance sensor > Crane positioning ng 0.05-20m frequency 5-10hz measurment accuracy +/-1mmAA
Crane positioning ng 0.05-20m frequency 5-10hz measurment accuracy +/-1mmAA
- 200 Unit / Units per Month
- CHINA ANY PORT
- T/T Credit Card
You May Like
-
laser rangefinder 0.03-200m measurement accuracy +/-1mm RS232/485 IP54or 67
-
Waterproof Mini laser distance meter with RS232/485 serial port
-
FST-3000m laser distance sensorRS232, RS485 ,4-20MA Analog output
-
laser distance sensor RS232 Interface accuracy +/-1mm for Container location measurement
-
200m laser rangefinder
-
5-1500m Hot Selling 104mmx13mm x51mm Laser Rangefinder for Golf
Product Details
| Place of Origin | Shaanxi, China | Brand Name | FORESIGHT | |
| Model Number | FST-20 | Size | 28*57*80mm | |
| Measurement Accuracy | ±1mm | Measurement Range | 0.05-20m |
Product Description
Applications:
1. Road traffic
2. Automotive anti-collision
3. Construction survey and design
4. Levelmaterial level detection
5. Robot arm control
6. Fixed length control of container crane spreader
7. Security monitoring
8. Military applications
Power Supply | +6V-32V |
Measurement Accuracy | +/-1mm* |
Measurement rage(no reflector | 0.05-40m |
Measurement time | 0.05-0.5s |
Laser Grade | Ⅱ |
Output Mode | RS232 ,RS485 Communication port |
Laser type | 635nm,<1mw |
Dimensions | 28*57*80mm |
Weight | 120g |
Operation temperature | -10 C°~40 C° |
Storage temperature | -25 C°~60 C° |
Protect Grade | IP54 or IP67 |
* Under the condition of bad measurement(for example if the ambient light is too strong. The point measured diffuse reflection coefficient is too big or too small, measurement accuracy has big error:±1 mm+40PPM).
** Under the condition of strong sunlight or target reflection is bad, please use the board.
Note: if you need RS485 Bus, which can connect 250nos of laser distance sensor at the same time
1.Cable connecting definitions
Red Line------VCC 5VDC or 9-24VDC
Black Liine-----GND
White Line-----RX,
Green Line----TX;
Yellow Line------SGND;
Kindly Prompt: If need to DB9 Female head, so RX,TX and G will be corresponding to connection to Second, Third and Fifth base pin of DB9 head separately.
Demo Software:
Communication:
- Uart: 19200, 8N1
- Send command of “O”: turn on the laser
- Send command of “C”: turn off the laser
Send command of “D”: measure distance and return the results
NOTE: If the laser sensor has any quality problem while using. Please contact the supplier for technical support, please don’t repair or disassemble by yourself, Thanks for your cooperation!.
Demo Software:
· Uart: 19200, 8N1
· Send command of “O”: turn on the laser
· Send command of “C”: turn off the laser
· Send command of “D”: measure distance and return the results
· Send command of “S”: return the module temperature and supply voltage
Frequently Asked Questions (FAQ)
On what kind of targets can be measured?
All opaque targets can be measured. Reliable measurements on transparent targets are not possible.
How is the measurement rate influenced?
The measurement rate is influenced by the target. If the laser light is well reflected by the target, fast measurement rates can be achieved (up to 0.15s in tracking mode).
Does dust influence the measuring process?
If dust overcasts the main part of the laser beam, then your
measurement will be influenced in a negative way. However, this situation can only be found in extreme dusty environment like cement hopper etc.
Is it possible to measure to a moving target?
Yes it is possible. The measured distance is the mean value between the distance at start and end of the measuring process.
What is the Measuring Accuracy?
The measuring accuracy corresponds to the ISO-recommendation ISO/R 1938-1971 with a statistical confidence level of 95% (i.e. ±twice the standard deviation, refer to diagram right. The typical measuring accuracy relates to average conditions and is ±1.5mm for the DLS(H) 15 and ±3.0mm for the DLS(H) 30. This is valid for the tracking mode.
The maximum measuring error relates to unfavorable conditions such as:
- highly-reflecting surfaces (e.g. reflector tapes)
- operating at the limits of the permitted temperature range, adaptation to ambient temperature interrupted
- very bright ambient conditions, strong heat shimmer
The maximum measuring error can be up to ± 2 mm for the DLS(H) 15 and ± 5 mm for the DLS(H) 30.
The DLS-A devices do not compensate changes of the environment conditions. If the environment conditions differ from 20°C, 60% rel. humidity and 953mbar air pressure, the accuracy can be influenced if the measuring distances is longer as 150m.
The effects caused by environment condition are described in:
B.Edlen: “The Refractive Index of Air, Metrologia 2”, 71-80 (1966)
Is the Laser Light eye safe?
Class II lasers are low power (< 1mW), visible light lasers that could possibly cause damage to a person's eyes. Some examples of Class II laser uses are: classroom demonstrations, laser pointers, aiming devices and range finding equipment. If class II Laser beams are directly viewed for long periods of time (i.e. > 15 minutes) damage to the eyes could result. Avoid looking into a Class II Laser beam or pointing a Class II laser beam into another person's eyes. Avoid viewing Class II laser beams with telescopic devices. Realize that the bright light of a Class II Laser beam into your eyes will cause a normal reaction to look away or close your eyes. This response is expected to protect you from Class II Laser damage to the eyes.
Can I connect the DLS device to a Siemens PLC?
Yes, you can connect a DLS device with the RS422 interface to a Siemens S7 PLC. Please find a detailed example in the application section. (AN2010)
Contact Us
- Xi'an Foresight Electronics Technology Co., Ltd.
- Contact nameJack Lee Chat Now
- Phone86-29-87858986
- AddressRm. 11308, Floor 13, Unit 1, Bldg. 1, No. 9 Mansion, North Of Nanerhuan, East Of Yanta Road, Beilin Dist.
Product Categories
New Products
-
100m laser distance sensor for measurement accuracy +/-1mm
-
4-20mA analog output less than 20m distance laser sensor under high temperature -20c-60c
-
5m laser distance meter RS232/485 Connection port measurement accuracy +/-1mm
-
1500m laser distance meter I grade (Harmless to the human eye with RS232 Serial port
-
high accuracy +/-1mm 15m laser distance sensor for height and length measurment
-
905nm 200Hz high frequency laser distance meter
-
RS232/485 Serial port or Analog out laser distance meter
-
500m Laser Distance Sensor with RS232/RS422 communication port
-
0.05-5000mm laser distance sensor
-
switch output laser distance meter
-
200Hz 905nm laser displacement sensor
-
10m laser distance sensor with IP67 Protection grade measurement accuracy +/-1mm
-
1500m laser distance meter with RS232 Serial port 905nm
-
150m laser distance sensor for steel industry
-
laser distance sensor 60m 0-10v analog output
-
non-contact distance measuring sensor
-
laser distance sensor 40m measurement time 0.05-0.5s
-
4-20mA analog output less than 30m distance laser sensor under high temperature -20c-60c
-
905nm long range laser rangefinder with RS232/485 interface applied in Air traffic avoidance
-
distance measurement sensor 0.03-50m measurement accuracy +/-1mm
-
High frequency 200Hz 905nm invisable laser displacement sensor
-
100m laser distance sensor for Height measuring
-
high measurment frequency and high accuracy 200m laser distance sensor/laser distance meter/laser rangefinder
-
road traffic control sensor with small size
Popular Searches
- measuring apparatus
- measuring instruments
- metering device
- Measuring Meter
- Dial Indicators
- digital caliper
- micrometer
- measuring tools
- vernier caliper
- dial caliper
- Dial Test Indicator
- Digital Dial Gauge Indicator
- Digital Dial Test Indicator
- Metric Dial Indicator
- Measuring Instrument
- digital vernier caliper
- Coating Thickness Gauge
- Laser Distance Meter
- measuring tool
- spirit level
- tape measure
- Height Measuring Instruments
- Measuring Tool Set
- Laser Spirit Level
- Level Measurement
- Laser Rangefinders
- range finder
- distance meter
- golf rangefinder
- hunting rangefinder
Recommended Products
- Laser Range Finder BH-VH
- LRF1550S Eye-Safe Laser Rangefinder Module
- LR12000 Eye-Safe Laser Rangefinder Module
- LR8000 Eye-Safe Laser Rangefinder Module
- LR6000 Eye-Safe Laser Rangefinder Module
- LR3000 Eye-Safe Laser Rangefinder Module
- SR2000 Eye-Safe Laser Rangefinder Module
- SR1200 Eye-Safe Laser Rangefinder Module
- SR600 Eye-Safe Laser Rangefinder Module
- P-1535-400U-M2 Eye-Safe Erbium Glass Laser
- P-1535-300U-M2 Eye-Safe Erbium Glass Laser
- P-1535-200U-M2 Eye-Safe Erbium Glass Laser
Find Similar Products By Category
- Measurement & Analysis Instruments > Optical Instruments > Laser Rangefinders
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Jack Lee
Welcome to my shop, I'm glad to serve you. Please feel free to send me any questions you may have.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile