2016 New Promotional Bluetooth Wireless Audio Transmitter And Bluetooth Handsfree Car FM Transmitter

Introduction

This product is a wireless FM Transmitter bluetooth car charger mp3 player for vehicle . Adapting professional-grade high-performance bluetooth module ,built-in mp3/wma decoder chip make it capable of playing the music files in memory card,firing into the car stereo via wireless FM. Besides, during the bluetooth connecting, play the phone’s music and FM transmitter to Car Audio, perfect ,as the calls incoming automatically switches to the speaker state, call end then automatically back the music player. The products with embedded echo cancellation microphone, you can easily switch between music and phone calls. So you do not do any modifications, easily enjoying the music and handsfree phone calls while you are driving.

Appearance schematic

Schematic Description:

1.Spin Button: Volume plus or minus/Down or Up song/CH+ CH-

2.Press down the spin button for multifunction: Answer/Hangup/Redial/Play/Pause

3.Mode Switch: Down or Up Song/FM/Volume/Call/Language

4.Reject Call, Disconnect the Bluetooth

LINE OUT Jack

Bluetooth Indicator

Mic

TF Slot

USB Charger Port

10. Display Window

4.Product Features

1.Adjustable to any angles ,and fit to all types of Vehicles

2.Support bluetooth 4.0/3.0/2.0, Support voice & calling prompt

3.Support charger for Android & Iphone or other device, max. Output 2.5A

4. Full frequency FM transmitter, total support 208 frequency

5. Digital Display

6. Support TF card MP3/WMA music play

7. Bluetooth answer, hang up, reject, redial calls and other functions

8. Echo cancellation and noise suppression (CVC) technology during a call

9. Automatic power-off memory function

10.Bluetooth stereo music play

5.Product Operating Instructions

5.1Bluetooth Mode Pairing and Connect

5.1.1. Enter the body ‘s cigarette butts into the base point, after power supply, product turned on automatically. If the TF card slot without memory card will be automatically entered into the bluetooth mode (the voice prompt "Bluetooth ready for pairing"). If the TF card slot with card will be automatically entered into play mode, then long pressbutton 2 quickly switch to bluetooth mode(the voice prompt”Bluetooth ready for pairing”

5.1.2.Power on the device and enter into bluetooth mode,LED will display real frequency. Bluetooth enter into searching status, red and blue light flash alternatly

5.1.3.Under pairing mode, bluetooth will search former matched phone, and it will automatically connect within the scope(the voice prompt”pairing successfully”.After searching  if without any paired phones, then it will search and pairing with new phone.

5.1.4. For the first connect with bluetooth handsfree needs the code to connect

5.1.5. In the Bluetooth hands-free power-on state, the phone's Bluetooth feature is set to open,and search to “FM01”devices and will display on the phone.

5.1.6 .Select "FM01" devices and automatic pairing(the voice prompt “pairing successfully”

5.1.7.Call

In the connected state,dialing the phone, the sound is automatically sent from the car stereo speakers .

5.1.8.Answer

In the connected state, when a call comes in, click  for answering, then the phone micro switch to the machine mic,click  for hang up the phone.

5.1.9. Reject a call

Phone coming, click  for reject the call.

5.1.10.Redial call

In the connected state, double, automatically redial the last call no.

5.1.11.Voice Prompt

When there is a call coming, voice prompt the phone number automatically

5.1.12. Play music stored in the phone

This product supports A2DP feature, you can play music stored on the phone, launched into car audio via Bluetooth hands-free FM, used to restore higher quality sound effects. Click  for Play/Pause, rotate to the right, for next song, rotate to the left, for Prev. song 

5.2.   TF card song mode

5.2.1. Insert the device into the car cigarette lighter socket, after power supply, product turned on automatically, if TF card slot with card, then it will automatically enter into music play mode.(The voice prompt”Music”). LED display the real frequency.

5.2.2. During music playing, short press for play/pause function, rotate to the right into the "next song", rotate  to left into the "prev. song".

5.2.3. Convert bluetooth and TF card play. Long press to switch to the bluetooth status, long press again to back to TF card play.The button can realize switching of two modes.

5.3. FM Receiver

5.3.1 Open car stereo in FM radio status, then comply the car stereo transmit frequency with the receive frequency car radio. Then the car stereo can play out from the machine music.

5.3.2 Adjust the transmission frequency: Short press mode button, then LED display“Fre”, Rotate the rotary button to achieve FM plus / minus function, the machine can be adjusted from 87.5 ~ 108MHZ transmitting frequency.

5.4.Volume Adjustment

The device volume is for level 30, it is recommended to adjust between 20 to 25. Short press mode button, display shows "VOL", realize the volume +/- by the rotating button

5.5.Language

This product built-in Chinese and English two languages, long press the mode button after hearing the "D" then two languages start switching 

5.6. USB Charger

This product supports one USB charger port, seeing (9) positions shown in above picture. For charging the phone and other digital products, support the output 5V/2.5 A (Max)

5.7 Audio Output Mode

The product supports audio output function, see (5) position shown in above picture. When audio line is detected to insert in, it will automatically stop FM launches, then music and phone output through the audio port

5.8.Power Failure Memory

For your convenience,under normal circumstance each time you use this product after the power failure,the system will automatically remember you this time playing track and transmit frequency information, and the next time when you use ,then start playback from the track, but when after you remove or replace the storage device or system error is detected, the system will automatically return to the first song starts playing.

6.Technical Parameters

7.Note

1. USB port for this device only used for charging, it can provide maximum output to 5V/2.5A. Don't use high-power electrical equipment or power inverter in order to avoid damage

2. When searching phone in bluetooth mode, please make sure the phone within the normal range and bluetooth in the matching state

3. In the status of inserting TF card, TF card will be in priority play status, if you want to connect bluetooth , then you need to adjust the play mode, please see 5.1.1 or 5.2.1

4. when the machine in FM transmitter ,volume will not be too much (generally 25 or less position) in order to avoid sound distortion, adjust the volume using the car stereo adjustments.

5.The machine FM transmitter built-in antenna, while also should try to avoid using strong local radio frequency signals to get better sound quality.

6.Due to various differences in the phone itself, the method used in the Bluetooth may be different in practice.

7. In the player again after power off, and some mobile phones may not automatically connect function, so need to use a manual connection again.

8 . Although this product is compatible with more than 95% of the current market major brands mobile phones, but there are still some phone are not compatible, in the purchase process please note.

9.During a call, adjust the volume to moderate, not too big, so as not to affect each other's call quality.

10.Don’t use this product in a particularly high or low temperatures and dusty, humid environment.

11.Don’t let the product fall for avoiding surface and body damage.

12. If long time no use the device, please take out from the cigarette hole. For normal use, please insert into after auto ignition, it can avoid damage by too high gnition voltage.