felt pads

 PBO pads are mainly used in the initial area as the substitute for graphite slats. However, the abrasion is very severe using this way, and it is recommended to use roller sleeves instead. The areas of using POB strips are the high temperature zone (above 500°C) in the step-wise and parallel-moving cooling table for giant extruders (above 3000T).

Resin treatment is available on request for better abrasion resistance and longer service life.

Technical Data:

Color: pure brown or surface brown and yellow underneath

Working Temp: 550°C for long time and 600°C for short time (within 15 min.)

Overall thickness: 5mm-15mm with regular products of 6mm, 8mm, 10mm

Width: 60mm-2000mm with regular products of 60mm,70mm,75mm,80mm,100mm

Length: 200mm~30,000mm

Density: 380g/m2·mm as standard, and customized up to 500g/m².mm

We specializes in producing heat resistance industrial seamless conveyor belt,PBOrollers,Kevlar rollers,Kevlar belts,spacer sleeve,PU timing belt and felt pad for aluminium industry and machine factory.Our products are proverbially used for the extrusion aluminium that being,transported,transferred,ageing.usd to protect the aluminium surface to avoid any vitiation. The quality and technology are leading in the same line,and the life is more than six months compared with other company.

Our competitive products:

1.heat resistant felt/belt(180c—600c)

2.280 centigrade degree nomex endless belt,roller,spacer sleever

3.480 centigrade degree kevlar endless belt,felt pad,roller sleeve

4.480 centigrade degree kevlar felt sleeve, belt, felt pad,roller sleeve

5.600 centigrade degree PBO felt sleeve,felt belt,felt pad,roller sleeve

6.180 centigrade degree polyester felt sleeve,belt,felt pad,roller sleeve

7.T10/T20/AT10/AT20HTD8M/HTD14M timing belts.