COAL MINE CEILING GRID OF China

Specifications

COAL MINE CEILING GRID:
1.ANTI-STATIC,ANTI-CORROSION
2.FIRE RESISTANCE
3.CONVENIENT TO WASH COAL
4.HIGH BEARING STRENGTH

Contact Information
Sales Manager: Danny 

Mobile Phone: 0086 15075828982 

Tel: +86 3187091666 

Fax: +86 3187952199 

Website:  www.  /www. hsbaoli. cn 

Companies: CHINA BAOLI GROUP 
Address: No.1888 Heping West Road, Hengshui City, Hebei Province, China.

 

1. Characters of BAOLI COAL MINE CEILING GRID:

Biaxial tensile plastic grids for coal mine is researched by Hengshui Baoli Engineering Plastic Co., Ltd., which according to the objective of Humanity, Safety, at same time peoper attention the principe of easy contruction, cost reduction. This prodcut mainly consisted of Polypropylene, through the special processing of anti-static and fire resistance, tesile in double sides, then form the whole grids. Its characters as following:

A.      Not easy to produce static when friction. Under coal mine, the resistance mean value of girds is 1×109Ω

B.      Good ability of fire resistance. In the environment of 760, only melting, no fire, it will extinguish as soon as the grids left flame if it fire.

C.     Convenient to wash coal. The density of this grids between 0.89 and 0.91, below the density of water, the  broken rids will float on the water during washing coal, easy to be wash out.

D.     Good performance of anti-corrosion.

E.      Convenient to construction and transport. It is not easy to hurt wokers because this kind of grids is sofe relative, convenient to pack and cut out, easy to transport under mine and construction.

F.      High bearing strength in longitudinal and horizontal.

After pressing and tensiling, grids molecule struction array newly, the materials elongation strength is greater 23 time than before. The ribs are vertical each other after double side elongated, this constrution can disperse press from grids surface to around ribs, thereby increased the whole grids bearing strength consumedly. When ourtside force act on one rib, the force will disperse to other ribs at the same time, reduce the concentrated force on one rib, not easy to rupture. And second, this grids is formed by double side tensile, not braided, so the creep rate is samll, and holes dimension is average, can avoid to drop cracked coal, protect works and tramcars safety.

2. Products Purpose of COAL MINE CEILING GRID:

This products mainly used in coal mine as ceiling and shield, also can be used to protect laneway when mining coal. It must double layers or more when used as ceiling.

 

3. Using condition of CHINA BAOLI COAL MINE CEILING GRID:

Used in coal mine, temprature range:15-60°C, humidity level:50-70%.

1-5 influence to environment and energy.

PP is innoxious, no pollution to environment, cracked grids can be recycled.