Standard Super Cell Rubber Fender

Specifications

1. Characters:
A: lease impact strength, high absorption of energy
B: easy to be installed and maintenance due to simple shape
C: It can be widely used and it will be suitble to any size of the ship or wharf.
D: It can be absorbed most of the impact energy of pitching and rolling when ship alongside.

2. Features
1.Low reaction force and high capability of energy absorption;
2.Due to its structure, the product has the characteristic of higher force absorption, and has long usage life.
3. Little influence on it when ships touch the dock from the bevel angle, so especially applicable for large ships and sea docks.

3. Specification of Super cell type rubber fenders:

1).Compare with general cell rubber fenders, Its rated Compression raise 5%,the reaction force is basicly the same, while the energy absorption nearly rise17%. The value of unit reaction force/energy absorption(E/ R.H)nearly rise 15%.

2). With front panel in the margin of fender, it can lower the pressure of the side board of the ship, the pressure can be controlled at below 200KN/m2, it specially apply for the berthing of large model ship.

3).UHMW-PE is set in the front of panel, it can reduce the friction factor between ship and fender, and lower the shear power while the ship berthing, and raise the life of fender using.

4). JSC super cell rubber fender Less changing performance of slant compression .

 4.Main accessories and application