hydraulic motor ultrasonic cleaner

woodencase
hydraulic motor ultrasonic cleaner

industrial hydraulic motor ultrasonic cleaner

hydraulic motor ultrasonic cleaner theory:

An ultrasonic cleaner is a cleaning device that uses ultrasound (usually from 20–400 kHz) and  an  appropriate  cleaning  solvent (sometimes ordinary tap water) to clean delicate items. The ultrasound can be used with just water, but use of a solvent appropriate for the item to be cleaned along with the soiling enhances the effect. Cleaning normally lasts between three and six minutes, but can also exceed 20 minutes, depending on the object to be cleaned.

B K Series of  hydraulic motor ultrasonic cleaner

1. Features

Adoption of international state-of-the-art technology incorporating with unique bonding technology; ensuring ultrasonic power, powerful output, never dropping vibrator; Additional functions such as heating ,thermostat and timing .ect .

2. Scope of application

   Cleaning of silica chip, electronic and electrical, medical machinery, oil pump and oil nozzle, part of compressor, spinneret plate, filter element, anilox roll and all kind of metallic part

hydraulic motor ultrasonic cleaner Specifications

About Our company

Jinan Bakr Ultrasonic Technology Co., Ltd. is a professional manufacturer and exporter that is concerned with the design, development and production of ultrasonic cleaning equipment. We are located in Jinan city, with convenient transportation access. All of our products comply with international quality standards and are greatly appreciated in a variety of markets around the world.

FAQ of our ultrasonic cleaner for brass

Q-1, How to maintain ultrasonic cleaners effectively?

A:1. Continuous working time should not be more than four hours.

    2. To avoid collision or violent vibration against the machine.

    3. Cleaning fluid should be precipitated, filtrated or replaced in time.

    4. To keep away from heat-source.

    5. To be strictly prohibited the conductive liquid from air intake at the top of the ultrasonic control cabinet.

Q-2, How to avoid damaging the work piece during cleaning?

 A:1. To use correct ultrasonic frequency and ultrasonic power.

     2.To choose suitable ultrasonic cleaning agent.

     3.To choose reasonable tooling basket and cleaning methods.