Acid and abrasion resistant of 95 alumina ceramic of Kingcera

Specifications

1. highly abrasion resistant
2. highly temperature resistant
3. corrostion resistant
4. good thermal shock resistant

 

 

Direct bonding ceramic

 

 

 

 

                

 

 

Kingcare offer optimized wear protection for plant components and pipe systems.

 

why wear protection? ---reduce cost and avoid downtime     

  

 

 

 

Specification:

 

Item	Index
Content of alumina	≥ 95%
Denisty	≥ 3.5g/cm3
Rockwell hardness	≥ 80 HRA
Impact strength	≥ 850 Mpa
Fracture toughness	≥ 4.8 Mpa . m½
Bending strenght	≥290 Mpa
Thermal conductivity	20 W/ M. K
Thermal expansion coefficient	7.2 * 10-6M/M.K

 

 

Product strucure:

Kingcera Alumina ceramic is directly affixed on the steel plate of inner wall of equipment by high temperature resistant inorganic bond and forms a firm wear resistant layer after heating solidification. Ther product is applicable for the air (wind) powder feeding, and can be used in a high temperature in long term without aging and peeling. 

 

Clear advantages:

 

--- long lifetime

 

--- maintenance free operation

 

--- no operation interuption

 

--- no production losses

 

--- no contaminaiton of conveyed mataterial due to abrasion, mixture or oxidation

 

--- physiologically harmless, suiable for food products

 

--- smooth surface to achieve good flowability and to aviod plugs

 

--- reduced pressure losses and lower energy cost

 

 

 

Services rendered for many branches of industry:

 

                   

 

            Coal fired power plant                                    Iron and steel Industry

 

                  

 

               Cement Industy                                                 Further Industries

 

 

 

Installation on site

 

 

 

Mechanicl fixings

             

Application examples:

 

           

 

 

Here is a list of typical abrasion problem components:

 

-- ash pipeline                                                       -- mixer troughs
-- belt discharge chutes                                        -- pipe bends
-- bunker spirals                                                    -- pipes
-- bunkers                                                             -- pneumatic backfill lines
-- channels                                                           -- priling tower bottoms
-- chutes                                                               -- pulpers
-- circulating air separators                                   -- receivers
-- continuous flow conveyors                                 -- screw conveyor troughs
-- cyclones                                                             -- separators
-- dissolving tanks                                                  -- setting basins
-- drying sections                                                   -- shaft spiral
-- dust collectingequipment                                    -- sifters                                                                             
-- dust collecting pipes                                           -- silos
-- fans                                                                    -- sinter troughs
-- flue gas ducts                                                     -- tailing lines
-- flumes                                                                 -- tanks
-- gravele lrease tunnels                                        -- thickners                                                                        
-- hoppers of rotary dryers                                     -- tubular chain conveyors
-- hydro-cyclones                                                   -- turbo separators
-- launders                                                             -- vibrating troughs
                                                                              -- washing drums