PAC-LV/HV For Dilling

Specifications

1, 90% purity
2. It is used as drilling fluid additives.
3. polyanionic cellulose
4. PAC-LV low viscosity
5. industrial use

 

 

Polyanionic Cellulose HV (PAC- HV) 

  

 

Polyanionic Cellulose HV (PAC- HV) is high molecular weight, high viscosity polymer for water-based drilling fluids, which can effectively reduces the filtration rate of many water-based oil and gas drilling fluids and may also be used to increase and stabilize viscosity to improve hole cleaning and suspension properties in a wide variety of fluid environments.

 

Polyanionic Cellulose Detailed Introduction :

Appearance is white or yellowish powder, which is non-toxic, odorless, and solvable in water, with stable resistance to heat, salt and bacteria. Our PAC is kind of high quality, low-viscosity cellulose polymer with low molecular weight. Mud fluid with this PAC can reduce fluid loss, with high inhibition and weather resistance. It is popularly applied to oil drilling especially brine well  .

 

Polyanionic Cellulose Unique Characteristics:

 

• 1) Evenly substituted, high transparency, control viscosity and reduce filtration loss
• 2) Applied in fresh water,seawater and brine water based mud system
• 3) Formulated mud show good filtration loss, brine-resistance and high temperature stable
• 4) Formulated mud show good rheology control,to inhibit clay or shale swell or collapse, hence to prevent well contamination
• 5) Stable soft soil structure, prevent well collapse
• 6) While drilling through the rock surface, to slow down the solid accumulation in mud.
• 7) Keep down the turbulence scale,to minimize the pressure loss in reverse-flow system.
• 8) Improve mud yield, reduce filtration loss
• 9) Stable foam in mud

Polyanionic Cellulose Physical & chemical specifications:

Item		Quality index
Purity,%(on dry base)		95.0 min.
Viscosity	PAC-HV(Brookfield 1% 30rpm, 25°C,dry base)	1500 min.
	PAC-LV(Brookfield 2% 30rpm, 25°C,dry base)	100 max.
Degree of Substitution		0.90 min.
Particle size,%(pass 80 mesh)		90.0 min.
pH		6.5-8.5
Moisture,%		10 max.

 

Polyanionic Cellulose Application:

1. PAC's application in drilling fluid : PAC used as inhibitor and filtration reducer is very good, and fluid mud made with PAC can inhibit dispersion and expansion of clay and shale in high-salt media so that sidewall pollution of drill can be controlled. Compared with CMC, PAC has better uniformity of response, with higher degree of substitution, better transparency and excellent resistance to salt and heat. It can create high-volume mud and cause low-volume loss, according to the test of OCMA.
2. PAC's application in workover fluid:Workover fluid made with PAC is of low solid so that the infiltration capacity of productive zone can be avoided being blocked, and productive zone can be protected. More, because of its low water loss, PAC workover fluid can reduce water that goes into productive zone, and the water that enters into productive zone will cause a water township phenomenon resulted from the blocking of emulsion. PAC workover fluid provides more benefits than any other same products do: prevent productive zone from being permanently damaged; clean drill hole and reduce maintenance to drill hole; block filtration of water and mud and cause less bubbling; store or can be used from one well to another, with lower cost than that of any other same products.

 

 

Packaging: 

 Packed in 25kg net valve bags

Storage: 

 Keep original packaging sealed, stored in clean and dry conditions

Shelf life: 

2years after production stored as above requested

 

  Company Information

Bluwat Chemicals is a professional supplier of water treatment chemicals and oil field chemicals in China. We provide our customers of both traditional and innovative products to ensure optimum control in a wide variety of applications including the treatment of drinking water, wastewater, process water, and also including oil/gas drilling and oil production.

Our core products are inorganic coagulants and organic flocculants for the treatment of water and polymer, PHPA/Polyacrylamide for oil/gas drilling and EOR (enhanced oil recovery). We also supply PAC and CMC for drilling application.

We built our own plants for our products to supply competitive products to our customers in all over the world. Our development work emphasizes working together with our customers to have higher performance and lower dosage on chemicals.

Our main business is for foreign market, we provide competitive products and efficient operation according to requirements from our customers, we also provide professional application support.

We are exporting our chemicals to more than 30 countries in the world, including Europe, USA, South and Central America, South-East Asia, Middle East, CIS and etc. We have good cooperation with many chemicals companies and water treatment companies on our products in different market, and we have had good cooperation partners as agent in some important market.

 

 

Main Production

• Poly Aluminium Chloride(PAC) , for drinking water treatment for wastewater treatment.
• Anionic Polyacrylamide (PAM)/Polyelectrolyte , for water treatment, for suldge treatment.
• PHPA(Partially Hydrolyzed Polyacrylamide) For Drilling , for drilling mud additive in the oilfield.
• Ferric Sulphate , for drinking water and wastewater treatment.
• PolyDADMAC , for water treatment and for paper mills
• Polyamine, for water treatment and textile wastewater treatment

Why chose Bluwat Chemicals: