Timer Control Board XBOX360 Jamma Timer Board XBOX360 to Jamma PCB Board for XBOX360 Game

Product Details                                                                                                                 

1. XBOX 360 console Time control timer board for XBOX 360 console to Jamma cabinet game. Add new games by yourself;

2.Original cable xbox360 gamepad and JAMMA are available, the connecting schematic diagram of IO board, Motherboard and gamepad.(Pictures as below).

3. Instructions: Suggested TIMER BOARD and Motherboard start at the same time with power, after successful start up, the screen will display the currentsetting status.(Picture as Below)

4. After 5 seconds INSERT COINdisplay, now can insert coins to start the game(P4). playtimewill be hiddenafter 5 seconds, each time press the start button will display and view how much playtime remaining, no coins or no playtime will always show.10 seconds before the end of time, will be display COUNTINE?, Then do not insert coins will be return to [INSERT COIN] screen (Picture as Below)

5. Settings: 

(1). [ONE COIN]---playtime settings: Press [SETTING BUTTON] on (P2), will displays setting menu, playing time can be setfrom 1-60 minutes, JAMMA START1 BUTTON to change. setting finished, press JAMMA START2 BUTTON to the next :[coin chute ] (Pictuer as Below).

(2).[COIN CHUTE]:There are three types for coin chute: COMMOM, INDIVIDUAL, CENTRAL(Picture as Below).

6. [DISPLAY MODE]---Time screen and Motherboard resolution match settings:
There are 6 types of display resolution setting: 1920X1080, 1440X900, 1280X768,1280X720, 1024X768, 640X480.
7. [DEMO SOUND]---Setting the demo sound ON/OFF.

8. [RECORD STEPS OF ENTERING]:

(1). If you set this option to complete , IO board will be auto skip to any page after boot with you want,(Example :Auto skip to game menu),Setting an example:after turn on the XBOX360 motherboard power,display and remain in the XBOX360 home page, press setting button,select [RECORD STEPS OF ENTERING] and press the START2 to enter the recording screen, press again the STATR2 to begin recording(Picture as Below).

(2).Then you can operate the joystick and buttons to reach what you want to skip the menu screen,the screen will display and record the buttons, after the recording is complete, press START2 finish and return to the previous setting screen. If you do not want to save the step of recording, do not select [SAVE AND EXIT], turn off the power just fine. Recording a save, please turn off all power to restart, after each turn the power, io board will follow your setting steps skip to the specified page, then stay and display the [insert coin], now the player can insert coin to start the game. (Picture as Below).

9. [RECORD STEPS OF EXITING]: This record setting options,recommend recording time over player did not continue the steps, also set to exit to the game menu, recommend , the recording using the X button to display the mainboard option, then choose to quit the game and return to the home page, after the other recording the same steps with [RECORD STEPS OF ENTERING]. JAMMA pin14 (Menu key) also use this to record the steps.(Picture as Below).