Electric glass lifter

Electric glass lifter /

12v battery supply vacuum lifter /

Glass lifting equipment /12v battery supply

Customer Glass sheet specification is:

(941)mm L x(1800)mm W x(3-25)mm T, Max. weight less than 400kg.

(1500)mm L x(3000)mm W x(6+6,8+12)mm T,   Max. weight less than 400kg.

The equipment specifications as below:

1. Model Number: GLA400-4-B-M

2. Max. carrying capacity is 400kg ( a safety factor 4.0 include)

3. Description:

   Designed for use with a crane or other hoisting equipment. The GLA400-4-B-M Lifer employs vacuum to hold a load for lifting, and provides Manual rotation, 360° edgewise, with locking at each quarter point and manual tilt, 90° between upright and flat for load manipulation.

4. Power Supply: Battery-12V, 4A

5. Capacity: Battery 10Ah

6. Vacuum pads diameter: 30cm nominal diameter. Lipped (P300FN)

7. Load capacity: (rated at [-60kPa] on clean, smooth, nonporous flat surfaces

8. Maximum(w/4pads):1695.6kg  

9. Load Movement:

   Manual rotation, 360° edgewise, with locking at each quarter point

   Manual tilt, 90° between upright and flat, with automatic latching in upright position

10. Standard Features:

    Low vacuum warning light

    On-board battery and charger

    Battery energy gauge

    Vacuum gauge

    Vacuum line filter

    Vacuum reserve tank

    Spring-mounted vacuum pads

    Movable vacuum pad mounts

    Vacuum pad extension arms

11. Manual valve is connected to suction cup separately and the operator can shut off individual suction cup according to the dimension of workpiece. This function is also useful for the self-check of vacuum reservoir.

12. The vacuum lifter uses USA GAST oilless rotary vanes vacuum pump to be the vacuum generator, the max. Vacuum degree is up to 85%, even no need to fill lubrication and cooling liquid.

13. The vacuum lifter is equipped with a buzzer and warning light units, in case of a power failure or vacuum leakage, an optical and an acoustic signal goes off immediately to warn the operator to do emergency operation.

14. The vacuum lifter is equipped with Vacuum reservoir tank helps prevent immediate vacuum loss in case of power failure and extends battery life by reducing pump cycles required to maintain vacuum. when the power is turned off in sudden, always can keep the workpiece not falling down for 5 minutes. Won’t bring about equipment damaged, etc Safe accidents.(EU CE standard for 5 minutes);

15. Operating Temperatures range: 32° to 104 °F(0°to 40 °)

16. Operating time: 8h

17. The design of vacuum lifter by our company is passed to EU CE 13155 passed. It is CE identification Product.