Y1R8 IP65 aluminum enclosure Rod thermostat.

Specifications

The Y1 range of thermostats with IP65 enclosures
Rod thermostats (Liquid expansion measurement)
Model : Y1R8
Thermostat : 8G

Main features:
These liquid expansion rod thermostats can be installed inside pockets as immersion thermostats in pipelines and containers, and for monitoring temperature in air ducts, in usual industrial application and environment. (Not suitable for hazardous areas).
- Internal adjustment is convenient for products that must not be frequently adjusted.
- Insensibility to strong vibrations
Standard electrical and mechanical life model
Temperature range: numerous from 4  to +350°C

 

Housing: Aluminum,IP65, IK10, 104 x 70 x 76mm. Grey RAL7032 epoxy painting

Set point adjustment ranges: 4-40°C (40-105°F), 30-90°C (85-195°F), 30-110°C (85-230°F), 50-200°C (120-390°F), 50-300°C (120-570°F).

Temperature adjustment: Set point adjustable by temperature printed internal knob. Shipped with °C printed skirt fitted on the knob, and °F printed skirt in spare part. Printed skirt is replaceable without tool.

Action: temperature control.

Sensing element: Liquid expansion rod. This rod has a non-temperature sensing zone named dead zone which allows thermal insulation crossing. An increased diameter under the thermostat head allows mounting pockets or brackets (See pockets in the accessories section)

Electrical connections: on screw terminal connection block

Earthing: on internal screw terminal

Cable output: M16 cable gland, PA66, for cables up to 10 mm dia.

Mounting: on pockets for liquid immersion or flange for air ducts

Identification: 20 x 40 mm stainless steel identification label, riveted.

Contact: SPDT

Electrical rating:

- Open on temperature rise contact (C-1) 16A(2.6) 250VAC

- Closeon temperature rise contact (C-2) 6A(0.6) 250VAC

- Electrical life >100.000 cycles.

Cannot be used in 400VAC

Minimum Storage temperature: -35°C (-30°F)

 

Main references  

Temperature adjustment ranges °C (°F)	References	Differential °C (°F)	Rod length (C, mm)	Rod diameter (D, mm)	Temperature sensing length (E, mm)	Max. temperature on rod °C (°F)
4-40°C(40-105°F)	Y1R8GB004040023C	3±2°C (5.5±3.6 °F)	230	10	140	60°C (140°F)
4-40°C (40-105°F)	Y1R8GB004040030C	3±2°C (5.5±3.6 °F)	300	10	140	60°C (140°F)
30-90°C (85-195°F)	Y1R8GB030090011C	4±3°C (7±5.5 °F)	110	10	87	120°C (250°F)
30-90°C (85-195°F)	Y1R8GB030090023C	4±3°C (7±5.5 °F)	230	10	87	120°C (250°F)
30-90°C (85-195°F)	Y1R8GB030090030C	4±3°C (7±5.5 °F)	300	10	87	120°C (250°F)
30-110°C (85-230°F)	Y1R8GB030110011C	5±3°C (9±5.5 °F)	110	10	83	150°C (300°F)
30-110°C (85-230°F)	Y1R8GB030110023C	5±3°C (9±5.5 °F)	230	10	83	150°C (300°F)
30-110°C (85-230°F)	Y1R8GB030110030C	5±3°C (9±5.5 °F)	300	10	83	150°C (300°F)
50-200°C (120-390°F)	Y1R8GB050200023C	8±5°C (14.5±9 °F)	230	10	59	250°C (480°F)
50-200°C (120-390°F)	Y1R8GB050200030C	8±5°C (14.5±9 °F)	300	10	59	250°C (480°F)
50-200°C (120-390°F)	Y1R8GB050200045C	8±5°C (14.5±9 °F)	450	10	59	250°C (480°F)
50-300°C (120-570°F)	Y1R8GB050300823C	10±5°C (18±9 °F)	230	8	165	350°C (660°F)
50-300°C (120-570°F)	Y1R8GB050300830C	10±5°C (18±9 °F)	300	8	165	350°C (660°F)
50-300°C (120-570°F)	Y1R8GB050300845C	10±5°C (18±9 °F)	450	8	165	350°C (660°F)

 

 JPCI Controls (Foshan Gaoming) Co., Ltd

Member of Ultimheat alli

ance

Ultimheat is a registered trademark, all rights reserved

Contact : Michelle Mai

T: +86 757 88638729

F: +86 757 88681850

Website:

 

Company profile:

Established in China since 2000, with French technology and investment, our company is proud to have more than 60 years experience in manufacturing electromechanical components and 30 years experience in manufacturing safety component for Spas, swimming pools and hot tubs. This experience, combined with high tech equipment and high tech raw materials let us develop the new components needed by rapid expansion of Asian and Chinese market.
In our new factory, on more than 8000 square meters production lines, we have two manufacturing divisions:
Division one is producing components:
Thermostats, energy regulators pressure switches, level switches, flow switches, fire detection fusible links, heating elements and ceramic connection blocks.
Division two is producing complete assemblies and sub assemblies on customer specifications:

Swimming pools heaters, heat pumps backup heaters, spas heaters, small water heaters, immersion heaters, aluminum foils heaters, baseboard and convection heaters sub assemblies
Our R&D team develops new products upon customer specification, taking care of international safety standard (UL, CE, etc.).
We produce our own stamping, bending, plastic injection, zinc alloy injection, and machining.
We are equipped with up to date automatic and CNC TIG welding and laser welding equipment and ultrasonic welding checking.
We have our own climatic room, corrosion testing loops, salt spray testing, and more than 30 specific equipments for products life testing.
Our income quality control laboratory is equipped to check raw material (plastics, metals) physical characteristics and dimensions.