Stainless Steel self-priming multistage pump

Specifications

multistage pump
stainless steel pump body
PPO/AISI 304 impeller
cost effective
self-priming

Stainless Steel self-priming multistage pump

 

RANGE OF PERFORMANCE

8Flow rate up to 70 l/min (9 m³/h)
8Head up to 45m

 

LIMITS OF USE

8Manometric suction lift up to 9m
8Liquid temperature up to +60°C
8Environment temperature up to +40°C

 

INSTALLATION AND USE

8These pumps are suitable for handling clean water
without abrasive particles and liquids that are chemically
non-aggressive to the pump components. Reliable,
economical and simple to use, they are suitable for
domestic use and in particular for distributing water in
combination with small pressure sets, for irrigating gardens.
The pumps must be installed in a covered area, protected
against the inclement weather.

 

MOTOR

8Two –pole induction motor (n=2850rpm)
8Insulation Class B /F
8Protection grade IP44 /54

 

MATERIALS

 

8Pump body: stainless steel
8Pump support: Cast iron
8Motor housing: Aluminum
8Impeller: PPO/ SS304
8Shaft with rotor: AISI 416 stainless steel
8Mechanical seal: Ceramic/ Graphite
8Bearing:  NSK, C&U, or local quality.

 

 Performance Chart

Techanical Parameter:

 

No.	MODEL	POWER		MAX.FLOW	MAX.HEAD	INLET/OUTLET	MAX.SUCT	N.W	PACKING DIMENSION
		(Kw	(Hp)	(L/min)	(m)	(Inch)	(m)	(K.g)	(mm)
A	HMC-2D	0.25	0.34	50	18	1"*1"	9	8.5	336*150*175
B	HMC-3D	0.37	0.5	60	27	1"*1"	9	9	371*150*175
C	HMC-4D	0.55	0.75	60	36	1"*1"	9	10	406*150*175
D	HMC-5D	0.75	1	70	45	1"*1"	9	10.5	441*150*175

 

8Three-phase 220/380V-50Hz (60hz), single phase 220V/60Hz, 110V/60Hz, 127V/60Hz & 110V/220V/60Hz are available on request.

 

 

PRODUCTION PROCESS SCHEME

 

Certificate