RGB Controller with 24 keys

Specifications

RGB Controller:
1.CE, RoHS approval
2.Provide OEM service
3.Do 5050,3528,SMD LED Light Source
4.Factory directly sales

RGB Controller :

 

 

Summarization

    24-key infrared controller adopts the advanced micro control unit,it is used for controlling a variety of lamp whose source of light is LED. For instance, point source of light,flexible light strip, wall washer lamp, glass curtain wall light and so on; it has many advantages such as low price, easy connection and simplicity to use. Meanwhile,you could adjust brightness, static color choices and various  dynamic changes in lighting effects through infrared remote control. In addition this product has short circuit protection function to make sure the load working normally .

 

Technical Parameters

  Working temperature:-20-60 ℃

  Supply voltage: 5V ,12V-24V <optional >(for orders specify voltage)

  0utput: 3 channels

  Connecting mode:common anode

  External dimension: L63ΧW35ΧH22 mm

  Packing size: L105ΧW65ΧH40mm

Net weight:50g

Gross weight: 70g

Static power consumption: <1W

Output current: <2A

Output power: 5V:30W,12V:<72W,24V:<144W

 

External Dimension

 

Interface specification

 

 

Direction for use

     1. Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;If it is not careful to happen load short circuit, the controller will be closed, you need to check the wire attachment and power on again .

     2. When operating ,you will hold on the remote control in straight front of infrared receiver to ensure that there is no barrier between the remote control and receiving head;

 The key-press functions are shown in the table below (in accordance with the key position order):

 

 

Line sequence setting instructions

     Power on the controller, then press  key, make the controller in output close state. And press the  key, the controller will enter into the line sequence setting mode, the load lamp will loop jump according to the certain line sequence. At that time, you could choose the line sequence you want:press the  key,

the load lamp will jumpy changing circularly in the order of R, G, B, it shows the line sequence is RGB; press the  key, the load lamp will jumpy changing circularly according to the line sequence of G, R, B,it shows selected line sequence is GRB;press the  key,the load lamp will jumpy changing circularly by B, R, G

order,it means the selected line sequence is BRG. After choosing the line sequence you need, press the  key again, the load lamp will go out, that means the line sequence you select is successful, then press the , according to the operating instructions, check the change of the light when pressing the remote, so

you can verify if your modified line sequence is correct.

 

 

 

 

 

 

 

 

Pictures for not lighting up:

 

  

 

 

Certification:

 

 

Application for rgb controller:

 

 

 

 

 

 

 

Machines for doing 5050 , 3528, 335 etc LED Lihgt source :