1) Equipped with electronic phantom load power source, assuring high stability, security and large output capacity.

2)Automatic adjustment of current measurement range. Fault self-detection in voltage amplifier and current amplifier.

3) Equipped with RS-232C interface, can be operated from software.

4) Test results can be saved to database, can be inquired from database and can be printed out.

Specification of phantom load power source:

Power and consumption:

Power supply: 3P4W 3x220V ±10%)

Max consumption: 3000VA ( 12 meter positions )

Current source:

Output current: 3×0.001A-3×120A

Adjusting resolution: 0.01% (min. 0.0001A)

Output frequency: 45Hz~65Hz;

THD(sine wave output): <0.8%

Stability of current during sine wave output:

0.05% (180s)

Output wave: sine wave

2-21 harmonic wave, total should be less than 40%

Odd harmonic waveform

Sub harmonic waveform

Output capacity: 20VA per meter position

Voltage source:

Output voltage: 3×30V - 3×480V

Load: The Load could be resistor / inductive / capacitive(<4uF)

Adjusting resolution: 0.01% (min. 0.1V)

Output frequency: 45Hz~65Hz;

THD (sine wave output): <0.8%

Voltage stability of power source during sine wave output:

0.05% (180s)

Output wave: sine wave

2-21 harmonic wave, total should be less than 40%

Output capacity: 15VA per meter position

Reference Meter:

Power and consumption:

Power supply: 1P2W 220V/240V ±10%, 50Hz or 60Hz;

Max consumption: 30VA

Voltage input: 3×30V-3×300V (AC)

Current input: 3×0.001A-3×100A (AC)

Accuracy:

Active power: 0.05% (PF>0.5)

Reactive power: 0.1% (PF>0.5)

Warm up time: < 2 minutes

Dimension: 482mm X 380mm X 140mm

Weight: <7.5Kg

Error Calculator Technical specification

Impulse of tested meter could be: TTL / OC / Optical head

Max. frequency of impulse could be: 200Hz

Error display range: 0.001%-99.99%

1) Three phase power source 1

2) Three phase meter rack (12/16 positions each rack)

3) Reference meter 1

4) Pulse input cable 1 for each position

5) Rs232c communication cable 1

6) Voltage supply cable 1 set for each position