debeader rubber powder production line

Specifications

The most practical tire recycling machine.
We have a patent tire recycling machinery.
cheapest recycling machine.

debeader rubber powder production line

Process flow:

waste tyre--cutting loop mouth--cutting strip--cutting dice crushing filtering--magnetic separating filtering--finished products

Processing method:

Physic mechanical crushing method at normal temperature of waste tyre:nochemical raw material is required,no waste gas,washte water and soot are discharged, and the cooling water of the equipment is reused,no emission,equipment noise is within the range specified by the country(GB20055-2006),fineness of rubber powder produced by it is adjustable(10 meshes to 30 meshes),take waste tyre as example,the process is as follows:breaking down,crushing,filtering,magnetic separating,grin-ding,then the finished products are produced.

1.Tyre bead ring cutting off machine
This machine mian to cut the inner dimater of the tyre, and cut the side of the tyre to the next step of segmentation.

Motor power	Working range	Working quatity	Size of figure	weight of equipment
2.2kw	750-1200tyre	25-30strips/h	1150*850*1200	0.5ton

2.Tyre bead steel ring seperator
Tyre bead steel ring seperator by double cell extrusion, and the two grooved roller speed differential will ring in the mouth than the wire separation, maintaining good physicalproperties of steel wire, rubber can then use it to avoid environmental pollution.

Motor power	Working range	Size of discharge	Size of equipment	Weight of euipment
15kw	1 mouth of tyre need1 miutumines	1.2*500*20	1500*1100*1200	1.8ton

3.tyre strips cutting machine
Strips cutting machine can cut cycle machine to remove the wire tire sidewall cut into strips, and the width of the adjustable section. Two circular knives for specialmaterials, hard and durable, can be used repeatedly grinding for no more than 1200 steel tires.

Motor power	Working range	Working diamater	Size of discharge	Size of equipment	Weight of equipment
5.5kw	10strips/h	Less 1200	35-55	1230*650*1580	0.8ton

4.yre rim cutting machine
Cutting machine can cut a tire strip, cut block, tool for the alloy cutting tools, nearly 9-11 tons per day, cutting tools are not sharp and repeated grinding

Motor power	Working quitaty	Size of discharge	Size of equipment	Weight of equipment
7.5kw	0.8-1.5t/h	35*35*35	780*550*1210	0.6ton