China best service CC DC aluminum circle plates for Pan

China best service CC DC aluminum circle plates for Pan

1) Alloy:1050 1060 1070 1100 1200 3003 5052

2) Temper: soft, 1/4 hard, 1/2 hard, hard,O , H12, H14,H24

3) Thickness: 0.3mm to 10mm

4) Diameter: 20mm to 1360mm

5) Use: Non-stick pan/pot, cookware,

Application: 1.making cooking pot,

                      2. kettles, 

                      3.non-stick cookware

                      4.lighting,

                      ure cooker and so on.

Packaging & Shipping

1. Standard seaworthy export packing, wooden pallets with plastics protection for the coil and 

sheet;

2. 15-20MT can be loaded into 20’container and 21-24MT is more suitable in 40’container.

3. The other packing can be made based on the customer requirement;

4. Normally, we have four layers of packing: wooden pallets, hardboard, Kraft paper and plastic.

 And fill more desiccants into package.

Product flow

We have strict and professional procedures of production:

(1)Before Producing : 

Assurance of compliance  the standard and material 

According to customer's order;                                   

Making production plan according to customer's order ;

Starting producing after receiving the payment from customer

 (2)Finished production :                 

Chemical test and Mechanical test by our quality department,Visual examination

Thickness measurement (Continuous Ultrasonic)

Length dimension control.

Flatness,Straightness,Visual & Di-mention check of edge

Weight control Marking

 (3)checking before delivery : 

Checking for packages

Certificate of compliance

Checking for Shipping

Our Certifications

         JN Honesty Aluminum company has passed ISO9001 and ISO14001 successfully, and also approved by American Food and Drug Administration (FDA). By the good product quality and professional service, we have set up a complete sales network. Until now, our products has exported to more than 20 countries and regions including Europe, USA, Canada, Brazil, Southeast Asia and middle east etc.

Quality control

The central laboratory is equipped with the device which made by the world's top manufacturer. 

They can carry out the test such as :the  product composition analysis, mechanical performance 

analysis, metallographic analysis, environmental simulation, heat test, testing analysis, corrosion

analysis, project.

Our company had built the quality supervision department and Aluminum lab to control the quality of production which will export the other countries.

Q: Are your Trader or Manufacturer?

A: We are professional aluminum sheet / circles /tread plate manufacturer in China, who have 

been in this line for more than 20 years. Our monthly capacity is 5000 MT,  about 560 peoples.

Q: What kind Aluminum production you can produce?

A: Our mainly production are aluminum sheet, aluminum coil, aluminum tread plate, aluminum 

circles, etc

Q: What’s the capacity of your factory? How many people factory?

A: Our monthly capacity is 5000 MT,  about 560 peoples. 

Q: Where is your factory location? 

A: Our factory are located in Jinan city, Shandong Province. Add.: No.67, East of Shengli Road,

Licheng District, Jinan, Shandong, China

Q: What would you do if any quality issue happened? 

A: Our company are ISO:9001 system. We promise if our aluminum material unqualified to

 International Standard, we will fund you the money. 

 Inventory

   Jinan Honesty Aluminum Industry Co., Ltd had built the biggest warehouse in North China which nearly 10000 square meters  using to store aluminum. Various sizes of aluminum is complete that's why more and more clints cooperate with us. No matter quality or  quantity,we have enough  Advantages.

  We own a huge warehouse that is well maintained and clean. The entire place is used to store the products to prevent them from any damages. Our warehouse is suitable to maintain large inventory and neatly categorize the range of Aluminum Extrusions Good service and Professional Technique team

  Jinan Honesty Aluminum Industry Co., Ltd. Is engaged in aluminum foil, coil, sheet, plate for more than 10 years, thus we have rich product, technology and market experiences. With the world’s top aluminum processing equipment, experienced technical staff, cooperative and professional sales team, and the enterprise concept of responsibility and sharing, we have been widely focused since the day set up, and has gained high praise from customers.

What is DC – Direct Chill Semi-Continuous Cast?

The starting stock for most rolled products is the DC (Direct Chill SemiContinuous Cast) ingot. 

The DC ingot is usually cooled after casting to room temperature and then reheated to around

 500C (preheating) prior to successive passes through a hot rolling mill.  The strip from the hot

 rolling mill is coiled for transport to the cold mill.Anodising qualities are typically produced 

through a direct chill semi continuous cast due to the benefits of a good surface quality  and  a  fine grain structure.

What is CC – Continuous Cast ?

The alloys are cast in form of continuous strips.  The aluminium casting is then cold rolled.  

Continuous cast is not well suited for an anodising process as this casting method gives a thicker

 defective surface layer and a non-homogeneous microstructure.

Why honesty                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

Our company adheres to the tenet of "survival by quality, build brand by reputation, win market 

by prices and innovate to develop", has developed international markets and the products are well

 sold in many countries as Singapore, Indonesia, South Korea, Dubai, Pakistan, Sri Lanka, 

Vietnam, Iran, Malaysia,  Mexico, Chile, Brazil, Holland,Italy, Belgium, Russia, Moldova, 

Paraguay, Uruguay, Germany, Spain, USA etc. More than 40 countries.; commonly we have 

more than 500tons stainless steel materials in stock; so w can arrange the soonest delivery too;

 also we hope we will have chance to cooperate with your esteemed company!

Our professional team