Widely used used rotary sand dryer /drying equipment plant

Structure  of  drying equipment

1. Large capacity efficient widely used crushed stone dryer machine is mainly used for the drying of the particulate materials with certain humidity and granularity.

2. The rotary dryer machine has the wide application range in the building materials, metallurgy, chemical and cement industries to dry the slag, limestone, coal powder, slag, clay and other materials as well as other small particles that can stand the high temperature and soot-stained materials. The moisture content of the materials in the cylinder dryer machine after drying can be less than 1-0.5%.

3. The wood chips rotary dryer machine is mainly comprised of rotary body, lifting blade, transmission device, supporting device and seals and other components.

Features of drying equipment

1. Compact structure, reasonable layout and simple structure.

2. Reliable operation, low energy consumption, high thermal efficiency of cylinder dryer machine.

3. Easy to automatic control, reduce operating personnel,save the labor resources.

4. Small foundamental investment reduces the one-off investment.

Technical parameters of drying equipment  

 About us : 

1. What the rotary dryer can be used for ?
This dryer can dry many kinds of materials which contain moisture, such as coal, coal slurry, slag, industrial waste, and clay stone. They are widely used in building materials, metallurgy, and chemical industry.

2. what the rotary dryer consist of?
the dryer is formed by rotary body, lifting blade, driving device, supporting device and sealing ring.

3. Can I use the coal or gas as the heating source?
Yea, you can use coal, gas, electricity, oil and wind power to heat the dryer machine.

4. How the rotary dryer to work?
The raw material plate is arranged conveniently to allow adjustable angle positions. The material to be dried is inserted to the rotary cylinder through the raw material plate. Hot air flows within the cylinder causing the separation of water from the material by converting it into vapor which is discharged into the atmosphere. At this point, the material becomes dry.

Advantage :
1.Three drum dryer use telescope-feed structure, dry the material quickly.
2.Simple design, self-insulation, improve the heat efficiency to exceed 80%.
3.Structure delicate, stable operation.
4.gooddryingperformance, coal consumption 
5.The fuel can be coal, oil, natural gas etc, dry mass, granule and powder material.
6.Reduce land area for 50% compared to single drum rotary dryer, so construction investment is saved 50%power consumption saved 60%.
7.Finished product moisture can be adjusted depends on requirement of client.
8.Lower outlet tempreture, loonger dust removal using life.
9.Drive by tug not gear.
10.Finished product tempreture lower than 60°C, packing can be done continuously.