2015 New G3 Steadycam Gimbal 3 Axis Brushless Gimbal for Gopro 3+ Camera Use

Specification

1.Professional camera accessories manufacturer with many years 

2.All DSRL Camera accessories are most completed in specification and typies in  Guangdong,China. 

3.With excellent design team

2015 New G3 Steadycam Gimbal 3 Axis                   Brushless Gimbal for Gopro Camera Use                  

Specifications

• Introduction:

  Heading Flower me mode: pitch and roll locking, heading with holding the direction of a smooth running.

  Heading and pitching Flower me mode: the two locking, heading and pitch direction as the direction of the handheld smooth rotation.

  Lock mode: the heading, pitch and roll are locked. 

  Parameter:

  Working voltage: Min. 7.0V, Max. 17.0V, Standard. 12.0V.

  Static attitude tracking accuracy: Min. 0.01, Max. 0.05, Standard. 0.02.

  Motion tracking precision: Min. 0.1, Max. 0.5, Standard. 0.2. (motor overload<2G)

  Motor overload protection current: 800mA

  Pitching angle motion ranges: -100~35.

  Roll motion ranges: -45~45.

  Course angle motion ranges: -150~150.

  Course angle motion ranges: -50~50

  Pitching follower me rate: 2°~50°/sec..

  Heading follower me rate: 3°~150°/sec..

  Net weight: 305g 

   

  Functions of lamp button:

  1.     1 click: 1 flash, heading flower me mode.

  2.     2 clicks: 2 flash, heading and pitching flower me mode.

  3.     Locked mode: light on, heading, pitching flower me and roll modes are locked.

  Status indicators:

  Blue light flash 3 times: full battery.

  Blue light flash 2 times: standard battery.

  Blue light flash 1 time: low battery. 

   

  Function Introduction:

   1.(heading Following me mode): both pitch and roll angles being locked, heading will rotate with the moving of the gimbal.

   2. Heading and pitch following me mode: roll angle being locked, heading and pitch will rotate with the moving of the gimbal

   3. Lock Mode : all of Heading ,Pitch and Roll angles are locked

   

  Attention:

  1.Power up after install the action camera 3 to the Gimbal. 

  The skills of adjusting pitch : double click the button first to be in heading and pitch following me mode. Adjust the attitude to move the pitch to the angle you want , then press the button once to lock the angle of pitch being in the heading following me mode .

  Autodyne mode: trun 180 degree of the gimbal,(the USB port facing you). adjust the angle of pitching through the method above, then you can Autodyne easily.

  Initialize the FY-G3 Ultra Gimbal (FY-G3 Ultra Gimbal needs to be initialized when the following situation appears ):  

  1. After power on, the angle of pitch has a little angle difference with the horizon line 

  2. After power on, the angle of roll has a little angle difference with the horizon line 

  3. When the heading is in the till condition, the angle of heading amends frequently in a small angle .

  The method of Initializing the FY-G3 Ultra Gimbal:

  Keep the gimbal in the still condition, then power on , it will initialize automatically.after that the gimbal can work normally.

  Method of gimbal initialization:

  Placed gimbal, remain motionless, then turned on the power, wait for gimbal movement after the operation, you can pick up the gimbal to work normally.