Sand Machine-PLS-1100

Sand Machine-PLS-1100

Application

This series of sand making machine is international advanced equipment with low-energy consumption which is development by our experts through drawing advanced technology from Barmac Company of the U.S. This crusher has features of stable and reliable working, convenient maintenance, high broken ratio, crushed materials are cube shaped, especially suitable for the production of machine-made sand, stone shaping, and can be used in fine crushing operations of a variety of ores and non-ore.

features
1.Simple structure and low operating cost;
2.High efficiency and low consumption;
3.Sand Making Machine has the function of fine crush and crude grinding;
4.Slightly influenced by the moisture content of material, and the max moisture content is 8%;
5.More suitable for crushing mid-hardness and high-hardness materials;
6.Cubic shape of final products, high density of piling up and low iron pollution;
7.More wearable and easy maintenance;
8.Low working noise and light dust pollution.

Working principle

materials fall from the upper part of the machine vertically into the high-speed rotating impeller. Under the high-speed centrifugal force, they collide and crush in high speed with the other materials which distribute around the impeller like an umbrella. After the collision with each other, the materials will format a vortex between the impeller and the shell, so that they will grind owing to the mutual impact and friction in many times. At last discharge from the lower part directly, and format a many-times-closed-circuit cycle. The finished products can be control by the screening equipment to reach the required size.

Principal data

The above processing capacity shall be based on the following condition:

1.Compressive strength of material≤160mPa

2.Accumulation density of material>1.35t/m³

3.Water content of material≤4%

4.Continuous,even and sufficient feeding