Purity Caco3 filler masterbatch recommend for PE film

PRODUCT ADVANCED CHARACTERISTICS

1. This product should be keep out of moisture damp before using;
2. The well mixed masterbatch raw materials and plastic must be used up within 10 hours, otherwise, the dehydration master-batch may lose efficiency because of absorbing the moisture in the air, and it is likely to cause the phenomenon of plugging the filter.
3. As for raw materials with large contents of water, the increase of amount is not recommended, because it may reduce the mechanical properties of the products, we recommend appropriate dry treatment;
4. It is no allowed to carry out dry treatment to the raw materials together with the plastic dehydration master- batch;
5. Before using, check packaging to make sure it is intact or not, unused plastic dehydration master-batch should be heat sealed as soon as possible.

1. Packaging:

25kg/bag - 50 sack/ pallet - 1250kgs/pallet - 25 tons/20ft container or

custom.

We normally use PE heavy-duty bag in side and sack bag out side .The

packing accept customized.

Storage:

1.Be stored in a dry place with good ventilation, avoid duct

pollution and moisture absorption.

3.The product is sensitive to moisture. No problem to store in original packing bags. Make sure to use product immediately after opening the packing bags. If it has moisture problem, dry it by hot air recycle machine under 90oC for 30 minutes.

2. Shipping:

Within 5-7 days after confirmed deposit or L/C.

An Phat Yen Bai Plastic and Mineral JSC   - founded in 2009 and  headquarter in the southern industrial zone - Van Tien commune – Yen Bai City – Yen Bai Province is a member of An Phat Plastic And Green Environment JSC.

Presently AnPhat Yen Bai is with 15000 square meter and was built in the southern industrial zone – Van Tien commune – Yen Bai City – Yen Bai province with the most modern lines which was imported from Japan and Taiwan with productivity of 20.000 tons/year. The main product is CaCO₃ filler masterbatch being used as additive in plastic field to reduce cost in production and white creating substance, increase to stand temperature, be durable for products, stabilize in shaping, increase printing, etc. In addition, The Taical is used in producing contruction material such as pain, powder, etc, Comestic industry, paper industry, etc

With young and qualified staffs and modern lines, and experience in many years, expectation to supply the best products and service to market, we always to listen to customer comments and ideas to continue researching and creating to increase business method and release products and service to meet the demand of market.

AnPhat Yen Bai – be honorable to be believable partner of Customers