Full automatic rotary autoclave retort machine

 Features

1.  Hot water is stored in the tank above, the temperature of sterilization rising very quickly.

2.  Completely submerged by water, the temperature can from all-round permeate into the product.

3.  Avoid the product contact with air in the whole process, cold air mass does not exist, optimization of the circulating water system, ensuring uniform heat distribution.

4.  The back pressure controlled by the in and out of steam to avoid pressure peaks, and greatly reduce the damage of packaging materials.

5.  Smooth gentle but rapid cooling to avoid thermal shock and the smell produced by cooking.

6.  When heated, the heat penetration into the product by fastest speed, ensure the required sterilization effect, the fastest to reach F desired value.

7.  Due to the rotation forced convection , there is no cold spots inside the package, also suitable for high viscosity products.

8.  All products submerged in the water. Because the cause of the buoyancy, greatly reduce the collision and friction between the products.

9.  Rotary stirring Products in the process of heating to prevent the temperature is too high, avoid destroying the container and products. Prevent delamination and precipitation phenomenon in the process of heating.

10. Ensure optimal heat transfer, high temperature short time sterilization can improve efficiency, handle more products.

 • Glass container: glass bottles, ceramic bottles and etc.

 • Metal container: tin cans and etc

 • Plastic container: PP bottles, HDPE bottles and etc.

 • Soft package: aluminum foil bags, high temperature cooking bags and etc

 • Gas-packing boxes

1.       What is max diameter we can do for you?

The maximum diameter which our company can make is 4.5m. And the length is up to your requirements.

2.       How much capacity can you treat per tank at a time?

It is up to the diameter and length of the equipment designed by your demands.

3.      Is the control system manual, semi-automatic or full-automatic?

Our control system is full-automatic operation system.

4.     Can we install the equipment by ourselves?

Of course, we will provide you with detailed installation information.

  Our company have three production lines to meet customers’ requirements ,20 senior engineers to design ,skillful welder to process the equipment ,24hours after-sales team to support. Our products have been sold to Russia, French, Peru, Uganda, Tanzania, Kenya and Burma.