75% Oil Yield Rate Waste Plastic Pyrolysis Machine Equipment By Shangqiu Sihai

Brief introduction

This plant can handle 5-7tons of raw material per 24 hours, the output of crude oil is 40-43%, carbon black 37%, steel 13%, Plastic 75% . the residue is waters.

Materials that can deal with

 waste plastics, waste rubber type of various products.

Liquid oil  such as  waste engine oil, waste oil and other waste washed pieces of oil.

Semi-solid: waste oil, diesel and other semi-underground storage of waste oil 2 flows

configuration of the plants

Working process Of pyrolysis plant:

First, the raw materials are put into the reactor, and then seal the feeding in door, later start the machine and the reactor will be rotating and heated by coal, natural gas, wood or electricity. When the temperature reaches the degree of 250 to 280, we will get the crude oil, the oil steam will be continuous produced until the temperature reaches 350-460°C; oil steam will flow through oil gas separator, light component will enter the condensers and meanwhile the heavy oil will be discharged automatically into in heavy oil tank. The liquefied part will be condensed as crude oil, and the part which cannot be liquefied will be transferred by the water seal back to the burning chamber to be reused as heating material.

 Land requirement: 10M*30M(300meter square) is needed to install the pyrolysis unit

This equipment only needs 2 or 3 people to operate it.

 Delivery time: around 20 days

 Payment terms : T/T. 30% advanced; 70% before shipping

Picture of machinery: