Steel yellow galvanised T nuts

Specifications

1. Good quality
2. Best price
3. Different sizes
4. Quick delivery
5. Good sales-after service

Introduction

 

Steel T nut is also known as Tee nut that has a four long and thin hooks and cylinder hole body with inside threads , the hooks of tee nut can sunken into the wooden material or plastic board for more retention .

 

 

Application

 

 

1. Wooden parts like sofa , wooden door and furniture etc .

 

2.  Plastic panel

 

3. Chipboard .

 

 

 

Specification of Nuts

 

Hex nuts is standard at the most time and there are DIN , ISO , BSW and GB standards etc so far .

 

Thread	M3	M4	M5	M6	M8	M10
pitch	0.5	0.7	0.8	1	1.25	1.5
hook height	2	2.5	4	6	5	7
body height	4.5	6.5	8	10	12	14

 

 

 

 

 

 

Finishs

 

finish	thickness um	environment   yes/ not
zinc	10	yes
oxidation	8	yes
nickel	10	yes
dacromat	20	yes
brass	10	yes
HDZ	50	yes

 

 

Material introduction

 

1. Wide application

Carbon steel is widely used for various building and project structure , and the bracket of factory , and bridge , car , vessel and steel tower and so on.

 

2.Easy to process

“C” element of the carbon steel is very few , the hardness is not as the stainles steel and this fits for different process methods .

 

3. Convenient for plating

Most carbon steel products have to be plated with various platings like zinc , nickel , brass and oil etc to keep the products without rust and long service performance .

 

4. Best cost

Carbon steel is the best cost in all the steel materails with good quality .

 

5. Enviroment friendly

All chemical elements and surface treatment are meet for the relative standards .eg , GB , ROSH etc

 

6. Perfect stability

Inside components and instructure of part are reformed after quenching , keeping this status long time , and that make part satisfied expect requirements .

 

7. Easy to welding

Alloy element of carbon steel belows 5% this make welding is very easy to be done and get good apperance .

 

 

 

 

 

Quality control

 

(1) Checking material before feed in

all material must be checked according to the requirements of products before put them onto the machines to ensure material is available .

 

(2) IPQC ( by handle and auto-machined control )

The semi-finished products must be checked in special tools during production , this ensure products are always under control .

 

(3) Chemical elements analysis and fhysical testing after post treatment

The most metal products need post treatment after finished proudct, all products will be tested after than to make sure the quality of products are meet the related requirement .

 

(4) The second inspection , sort all finished goods by sorting machines if required ;

All goods were finished , they must to be tested and checked before package ; In this phase , goods will be checked in full inspection or partial inspection . and checking methods can be by handle or auto-machines .

 

(5) Packing

Packed in polybags and cartons or in small color bags .

 

(6) Last inspection ( spot checking , packages status , quantity etc )

When all goods are ready , we will make a final inspection for quantity and package’s status .

 

(7) Delivery

Everything is ready , we will deliver goods to appointed place or port according talking

 

 

 

 

Packing

 

1. In bulk

 

 

                   chipboard cartons with belt on the outside

 

Items are packed in apparent polybags and solid cartons then , usually 3-5 bags in each carton and the gross weight is about 15 kilograms .

 

The sizes of the carton

 

20x28x16

16x18x25

20x22x28

16x18x28

 

Application

 

This package is usually for private use in the factory to assemble parts

 

 

Advantages

 

1) suitable for production line in the factory

 

2) big quanity each bag

 

3) low cost on package

 

 

 

 

2. Box

 

 

 

Items are packed in boxes inside and some boxes to a carton , the boxes would be colored or plain . 10-15 kilograms each carton . it contains plastic box and chipboard box . and both kinds of boxes can be print the customer’s logo .

 

 

Application

 

Box package is usually for sales in store .

 

Advantages

 

1) Individual packing

 

2) Customization design

 

3) Easy to sales

 

4) easy to check

 

5) easy to carry

 

6) not easy broken

 

7) beautiful apperance.

 

 

 

FAQ’s

 

Q. How about your capacity ?

 

A. With scale of ten thousand square meters , different processing machines , we are able to finish up to 2000 tons raw material every year , generally , one full 20 feet container ( about 20 tons) can be done in 20- 25 days .

 

 

Q.How long I can get samples for approval before placing order ?

 

A. Let you get and confirm samples in first time is our reponsiblity and pleasure , just in one week for new samples that need to be done in new tools , and we can deliver samples within 24 hours for exsiting samples once received your request .

 

 

Q.What are your popular payement menthods ?

 

A. T/T is our prior choose for all , of course , we are also accept L/C , Westunion , paypall .