Welded Reinforcement Mesh / Reinforcing Mesh (Wire 5 -12mm, 11.8m long)

Specifications

Welded Reinforcement Mesh / Reinforcing Mesh (Wire 5 -12mm, 11.8m long):
1.Wire: 5-12mm 2.Holes: 10-20cm 3.W&L:1m-2.4mW 12mL

  Welded Reinforcement Mesh / Reinforcing Mesh (Wire 5 -12mm, 11.8m long):     

                                                        

Reinforcing steel welded mesh made of low carbon steel wire rod, which undergo a cold-rolling and straightening process and arranged vertically in proper spacing in the welding machine at the line wires and cross wires, joint together by mean of electric resistance spot-welding, also directly welded with hot rolled wire rods

 The reinforcing mesh has following merits:

 Great hardness, good elasticity, uniformity spacing high welding strength, hard to deform by trample

2. Properties of products

Item	HRB-335Hot-rolled	HRB-335Hot-rolled	HRB-550cold-rolled
Tensile strength (MPA)	.>490	.>570	>550
Yield strength (MPA)	>335	>400	>550
Elongation %	>16	>14	>8
Shearing force   (N)	>150 x AS	.150 XAS	>150 XAS

3. Technical standard:

 Reinforcing weld mesh is widely used in reinforced concrete structures of multi-storey and high building, airport runways, highways, tunnels, concrete pipes, bridges, water conservancy dam foundation, piers, warehouses and sewage treatment tanks and so on.

We not only produce as per the national standard of welded mesh fabric for reinforcement of concrete but also the products according to the AS/NZS 4671:2001(Australian and New Zealand standard)

4. Steel mesh in the tunnel lining, reinforced steel mesh spacing of 150 ~ 300mm. 

 150mm × 150mm, 200mm × 200mm, 200mm × 250mm, 250mm × 300mm, 300mm × 300mm 

4. Picture of Products