Prefinish Big Width 189mm Merbau Engineered Wood Flooring

Specifications

Prefinish Big Width 189mm Merbau Engineered Wood Flooring 

15/18/21/22x189-260x1830/2200 mm

Top Layer:4mm-6mm

Grade:  A/B/C/D

Moisture: 10% +/- 2% or as requested

Dimension: 15/18/21/22x189-260x1830/2200 mm

Top layer: 0.6mm to 6 mm

Pre-finish: Treffert UV from German, natural oil or un-finished

Surface: normal; hand scratched; archaized; brushed;

Gloss: semi-gloss: 35 +/- 5% High-light:75 +/- 5%

Joints: 4 sides T&G, with mirco bevel

Packing: 16 pcs in a carton, then packed in pallet, the pallet is shrink wrapped and strengthened, which means about 23 M3 per 20' container

Lead time: monthly production capacity is 80,000 M2.

Sample: free of charge

Note:

1. The flooring is made of natural material. The grain and color is unique. The shipment might be different from sample and photos in color and grain. We sort the flooring to minimize the color difference among products in one pallet.

2. The buyer should advice the moisture content of the target market. The seller will manufacture according to it to minimize flooring deformation.

Use &Maintain:

1. Keep the flooring dry and clean.

2. Wax the floor every 3 to 6 months to protect the floor and keeps the floor bright.

3. Don't impact the floor with heavy and hard objects. The feet of chairs and heavy furniture should be put on protective mats.

4. Prohibit exposing for long time under the intensive sunshine or soaking in water.

5. Keep the moisture content of the room in a proper condition

Why to choose high quality multi-ply engineered wood flooring from us? 

1. Made of 100% natural real wood.
2. Each veneer for plywood with stable Moisture Contents 8%-10%.
3. Core material comes from our own forest with FSC.
4. Pywood with Unique design more stable.
5. Formaldehyde emission meets the standard E0.
6. Finish with Teffert UV coating for each paint. 
7. Surface:Anti-scratch,waterproof with good abrasion resistance. 

Below is the brief introduction of our workshops: 

Veneer Cutting Workshop
1. A cutting scope of 0.55~4.0mm to meet different markets' needs.
2. Cutting timber with different hardness, perfect combination in horizontal and vertical direction.
3. Operated by digital equipment to make sure the production precision.
4. Suitable cutting angle, smooth surface without any fault.
5. Can reducing the strain degree of wood fiber, releasing the veneer's internal stress to make sure the flat without distortion.

Drying Lines
1. Transfer heat through heat transfer oil to assure average heating and stable moisture content.
2. Combining the net drying and the roller drying to assure the veneer's flatness and to control the shrinkage effectively.
3. Cooling after heating to fully release the internal stress of veneer. 
4. Control the drying temperature via digital equipment to meet different production need. 

Board Joint Lines
1. Repairing strained fiber completely.
2. Digital control to get rid of different thickness in advance to gain even thickness.
3. Exact joints to escape empty phenomena.
4. Flat surface which is good for the following process.
5. High production efficiency to accelerate the production schedule.
6. Good jointing square degree and diagonal error within production standard. 

Plywood Factory
1. Continually optimize the production process to raise the production efficiency.
2. Prudent operation and clear & rapid processing to prevent gel-drying to come to the best gelling degree.
3. Clearly assemble and mature operation; flat surface and high square degree.
4. High design production capacity to meet large lots production. 

Veneering Lines
1. High automatic degree and the wholly photo electric control can match the operator effectively with high production efficiency.
2. Gel equably and flatly to prevent the lack of gel in advance to make sure the best gelling degree.
3. Clear guideline together with electronic correcting to keep the stable veneer quality.
4. Switching function with multiple specifications to meet different products needs. 

Grooving Lines
1. Applying diamond cutting tool by German Leitz.
2. Smooth and skillful groove; regular joints.
3. Strictly inspection to guarantee precise size of products.

Coating Lines
1. Multi-layer paint coating and average coating with strong adhesiveness.
2. Different timber with different processing to prevent faults caused by the special character of timber.
3. Highly restore original color of rare wood; clear grainand stable tone.
4. Super wear-resistance and UV protection.
5. Average coating to prevent color difference.
6. Sealed and dustless production line to guarantee bright and smooth painting. 

Heat Treatment Plant
The hear-treated (carbonized) wood with
1.Better dimensional stability;
2.Better resistance against micro-organisms and fungus attack;
3.Exotic colors but 100% chemical-free process;
4.Long durability; 

Its application areas can be:
a)Humid areas, wellness, sauna room, swimming pool; 
b)Office Rooms
c)House Rooms