CW GMP standard wholesale protein shaker machine with stainless steel

Specifications

1. durable structure
2. direct factory

Brief description

The round separator is a universal device designed with full demonstrability and utmost optimization and have the tend to be standardized. It is very suitable to separate small particle, minuteness powder and the separation of solid and liquid.

 

Features:

1. This round separator is one of precised powder sieve,it is of high efficiency,and the screening accuracy exceeds 90%.
2. It adopts whole sealing structure design,the sealed effect is fairly well,no dust pollution,no leaking liquid,no material left in machine,and no dead angle in the net frame.
3. Small volume and light weight,easy to be installed and maintained.
4. The outlet can be adjusted at any angle,and it is easy to replace the screen.
5. the rubber ball device can reduce the changce of jam on the screen.
6. By adding the device ultrasonic instrument conversion device,  superfine materials up to 600 mesh can be sieved.

 

Scope of application:

It is widely used in many industries, such as mining,building,materials,metallurgy,casting,abrasive,chemical,light industry,medicine and food industry.

Principle of the structure.

It uses vertical motor as the source of vibration, with eccentric hammer on the both sides of motor ,change circumrotate to level ,upright and incline movement,then pass these three movement to surface of the screen. Adjust the phasic angle on the both sides of the top and bottom to change the movement track of the surface screen. This will help to screen different materiel in different situation successfully.

 

  

Technical parameter

Model	Diameter (mm)	Layers	effective diameter of screen surface (mm)	Sieve mesh specification	Maximum material size (mm)	power(kW)
S496-B	Φ654	1-3	Φ614	2-325 mesh	20	0.5
S498-B	Φ800	1-3	Φ760		30	0.75
S4910-B	Φ950	1-3	Φ910		30	0.8
S4912-B	Φ1160	1-3	Φ1120		30	1.5
S4915-B	Φ1500	1-3	Φ1460		50	2.2
S4918-B	Φ1768	1-3	Φ1720		50	2.5
S4920-B	Φ1950	1-3	Φ1910		60	2.5

 

 

 

FAQ:

 

Q:What factors I need to get a quotation?

 

    A: Material bulk density, mesh size(length & angle for conveying series) & ideal capacity for proper type, granularity distribution is recommended. product material requirement (carbon steel Q235A, stainless steel SUS304 or SUS316,etc.) Voltage & Frequency(Hz) is also needed for a precise quotation.

 

 

 

Q:What is the real delivery time of your factory?

 

     A: 7 to 15 days for general series products, meanwhile, batches products & customized products would need 30 days to 60 days based on different situations.

 

 

 

Q: How do you ensure the quality of your products?

 

      A: With our experienced quality control team, we are trying to offer most of our customers the product with bset quality. However, we do recognized that there do have small amount of the product which may got faulty or damaged for different reasons.

 

 

 

Q: How do your after-sale service work if the product got damaged?

 

      A: In the gurantee time 12 months, our general after-sale service is changing the damaged parts for the customer, but if the damage could be repaired by slight cost, we would wait for the customer's bill for the fix cost and refound this part of cost.(note: Vulnerable parts do not include.)

 

 

 

Q: How could I trust your promise?

 

     A: Firstly, you may check the assessment on our website certified by the appraisal agency Bureau Veritas;

secondly, we attend at least 4 to 6 international industry exhibitions held in China annually, like the Food Ingredients China, China International Battery Fair, CPhI, ICSE BioPh China, ICIF China, etc. We usually met our customers there for negotiation;

Thirdly, company inspection always available, if you have any representative or you would like to come to our site, we offer free shuttle from Zhengzhou airport to our company, welcome your visit.