Professional hotel telephone set connect with PABX intercom

Professional hotel telephone set connect with PABX intercom

Specifications

hotel telephone 
1, Color : White & Black 
2, Printing : Available 
3, Compatible with all kinds of PABX. 

Main Features : 

-One key connect(+10,+8,+5,+3,+0).
-FSK/DTMF caller ID.
-Receive and store incoming number while another line is busy.
-16 digits LCD display and LCD brightness 7 levels adjustable.
-Total / repeat/ out of area and private indicator for incoming information.
-Calendar and auto adjust time under FSK system.
-80 incoming number and time store, review, callback and del function.
-25 outgoing number and time store, review,callback and del function.
-3 way conference and music on hold.
-Auto select line feature.
-Different ring for two different line.
-Local area code setting.
-Flash time adjustble to fit for different exchange and three way talk,standard flash time is 900ms. 

Technical Specifications:

 1) Operating conditions:

   Environmental temperature: -10~ +40°C    

  Atmospheric pressure: 86~ 106Kpa

  Relative humidity:  10%~95%      Environmental noise:  ≤60dB(A)

 Working Frequency: 300~ 3400Hz

  2) Characteristics of dual-tone-dialing

 - rated low frequency group frequency: 697HZ   770HZ   852HZ   941Hz.

 - rated high frequency group frequency: 1209HZ  1336HZ  1477HZ 1633Hz.

 - DTMF FREQUENCY TOLERANCE: ±1.5%.

 - DTMF LEVEL LOW GROUP:  -8dBM±3dB.

 - DTMF LEVEL HIGH GROUP: -6dBM±3dB.

- TWIST LEVEL:  2±1Db.

- DTMF TOTAL DISTORTION: 20dB

  3) Characteristic of ring:

    RINGER SHOULD WORKING AT: ≥70dB(A)

  4) Sending, receiving loudness rating (SLR & RLR) and Side-tone masking rating (STMR):

 TRANSMIT AT 0KM(EIA)                (-44 - -56dB)

TRANSMIT AT 4.5KM(EIA)               (-37 - -46dB)

RECEIVER AT 0KM(EIA)                 50 - 41dB

RECEIVER AT 4.5KM(EIA)               54 - 45dB

SIDETONE AT 0KM(EIA)                 >4dB

SIDETONE AT LIMITING LINE(EIA)       >4dB

Searching Sheet of Function Settings:

1) One-key-dialing Settings

        A. Number Settings: under the Pick-up handset or Speaker condition, press “ * ” for 4 seconds,and listen “ beep ” cont voice ), then input digit (0-9),then press memory key (M1-M9), then the number was programed in the key.

     Note: a. the old number will be deleted when a new number is saved.

                b. Maximum length of the number saved with one-key-dialing is 32 digits.

        B. Dialing number:under the pick-up handset or SPEAKER condition, press the one memory key,the stored number will be dialed out automatically.

 2) Redail

       Pick up handset and press redial key,would dial out the number that was dialed within last 4 minutes.The number before 4 minutes will be deleted automatically to protect guest privacy.

3) Music on hold

Under pick-up condition,press “HOLD” key,telephone keep the line and output music, HOLD music will be released automatically when joining phone or off-hook.

4) Volume functions

A.ring volume: ring switch(RINGER),choose (HI) or (LOW) to adjust volume.

B.Speaker/Handset  volume: under pick-up or speaker condition,press volume key to adjust volume for 4 level cycle.

 5) Flash

          Under pick-up condition,press flash key to carry out hangup or transfer function.

6) Auto hangup

          When finished the call, and the caller already hung up, or this telephone didn't hung up,the PBX will send busy voice,after 12 times busy vioce will hang up automatically,then recover normal function,don't impact next incoming