Home > Products > Rigid foam system for refrigerator insulation > rigid polyurethane foam system for refrigerator insulation
rigid polyurethane foam system for refrigerator insulation
- 3000 Ton / Tons per Month
- Shanghai
- T/T
You May Like
Product Details
| CAS No. | 9009-54-5 | Place of Origin | Shanghai, China | |
| Type | Other | Brand Name | Dongda | |
| Model Number | DJD-103 |
Product Description
Specifications
polyurethane foam system for refrigeratorgood flowability
low-temperature dimensional stability
enviromental protection
Products Introduction
Rigid Polyurethane blend polyols foam system for refrigerator and freezer
DJD-103 blend polyols use CP or CP/IP as blowing agent, which applies to refrigerators, freezers, and other insulation products. The characteristics of the products are as follows
1.excellent flowability, the density of the foam is well-distributed, and the thermal conductivity is low
2.excellent low-temperature dimensional stability and good cohesiveness;
3. demould time is 6-8 minutes.
Physical Properties
Appearance Hydroxyl Value mgKOH/g Dynamic Viscosity (25 °C) mPa.s Gravity (20 °C ) g/ml Storage Temperature °C Storage Stability month | pale yellow transparent viscous liquid 360-420 3000-4000 1.06-1.08 10-25 6 |
Recommended Ratio
pbw | |
DJD-103 blend polyols CP or CP/IP Isocyanate | 100 12-14 136-142 |
Technology and Reactivity(the exact value varied depending on processing conditions)
Manual Mixing | Mechanical Foaming | |
Raw Material Temperature °C Mould Temperature °C CT s GT s TFT s Free Density kg/m3 | 20-25 35-40 12-16 75-85 100-120 25-26 | 20-25 35-40 8-12 50-70 70-100 24-25 |
Foam Performances
Foam Density by Molding Closed-cell Rate Thermal Conductivity (15 °C) Compressive strength (perpendicular to the direction of rising) Dimensional Stability (24h, -20 °C) (24h, 100 °C) | GB/T 6343 GB/T 10799 GB/T 3399
GB/T 8813 GB/T 8811
| ≥35kg/m3 ≥90% ≤22 mW/(m.K)
≥150kPa ≤0.5% ≤1.0% |
The data provided above are typical value, which are tested by our company. For our company's products, the data included in the law do not have any constraints.
DJD-103 blend polyols use CP or CP/IP as blowing agent, which applies to refrigerators, freezers, and other insulation products. The characteristics of the products are as follows
1.excellent flowability, the density of the foam is well-distributed, and the thermal conductivity is low
2.excellent low-temperature dimensional stability and good cohesiveness;
3. demould time is 6-8 minutes.
Physical Properties
Appearance Hydroxyl Value mgKOH/g Dynamic Viscosity (25 °C) mPa.s Gravity (20 °C ) g/ml Storage Temperature °C Storage Stability month | pale yellow transparent viscous liquid 360-420 3000-4000 1.06-1.08 10-25 6 |
Recommended Ratio
pbw | |
DJD-103 blend polyols CP or CP/IP Isocyanate | 100 12-14 136-142 |
Technology and Reactivity(the exact value varied depending on processing conditions)
Manual Mixing | Mechanical Foaming | |
Raw Material Temperature °C Mould Temperature °C CT s GT s TFT s Free Density kg/m3 | 20-25 35-40 12-16 75-85 100-120 25-26 | 20-25 35-40 8-12 50-70 70-100 24-25 |
Foam Performances
Foam Density by Molding Closed-cell Rate Thermal Conductivity (15 °C) Compressive strength (perpendicular to the direction of rising) Dimensional Stability (24h, -20 °C) (24h, 100 °C) | GB/T 6343 GB/T 10799 GB/T 3399
GB/T 8813 GB/T 8811
| ≥35kg/m3 ≥90% ≤22 mW/(m.K)
≥150kPa ≤0.5% ≤1.0% |
The data provided above are typical value, which are tested by our company. For our company's products, the data included in the law do not have any constraints.
Contact Us
- Shanghai Dongda Polyurethane Co., Ltd.
- Contact namePan Li Chat Now
- Phone86-21-57248959,15900416162
- AddressNo. 307, Shanning Road, Shanyang Town
Product Categories
New Products
-
Polyurethane foam system for solar energy
-
Polyol blend for Low Pressure Solar Energy water heater
-
High Pressure Solar Energy Polyurethane Blend Polyols
-
rigid foam system for solar energy
-
Polyurethane foam system for solar energy
-
Blend polyols polyurethane for solar energy water heater made of rigid foam polyether
-
Blend polyols polyurethane for high pressure solar energy water heater made of rigid foam polyether
-
Blend Polyether Polyols for Discontinuous Panels
-
Polyurethane resin spray Insulation system
-
Rigid Polyurethane Systems for Spray foam Insulation
-
Blend polyether polyol for spray insulation
-
Rigid PU Blend polyols for Spray foam Insulation
Popular Searches
- Pine Rosin
- Colophony Rosin
- Rosin Modified Phenolic Resin
- resin set
- polyester resin price
- Methyl Cellulose Hemc
- Water Retention Agent Sap
- Latex Free Powder
- c9 aromatic hydrocarbon resin
- poly vinyl alcohol
- polymer pack
- pentaerythritol rosin ester
- water-retaining agent
- ac resin
- acs resin
- adorn. resin
- adorn. resins
- air resin
- an resin
- asia resin
- at resin
- agricultural sap
- Fr Resin
- airliner resin models
- Pla Powder
- Baby Sap
- ball absorber
- band resin
- be resin
- be resins
Recommended Products
- Lithium adsorption material, Lithium extraction material,
- Calcium and Magnesium removal ion exchange resin from lithium solution
- Molybdenum Extraction Resin
- Nickel extraction resin
- Ion membrane caustic soda secondary brine purification chelating resin
- Copper removal resin
- Chromium removal ion exchange resin
- Recovery of gallium resin from mother liquor in Bayer process
- Platinum group metal extraction resin
- Lithium extraction resin
- Phosphorus Removal Resin
- Rhodium adsorption resin
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Pan Li
Welcome to my shop, I'm glad to serve you. Please feel free to send me any questions you may have.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile