Contact Sheet

Specifications

Electrical contact,bimetal rivet,silver rivet,Tri-metal contact rivet,contact sheet,silver wire,Alloy wire,oxidized contact.

AgCdO contact sheet:
AgCdO is kind of most important contact material among silver metal-oxide materials
and it is widely used in low-voltage devices, when the temperature is higher
than 900^oC, CdO is sublimated and the contact surface is cooled down
and the arc energy is reduced and the arc is extinguished. It can also increase
the resistance against welding. Contact materials produced by powder sintering-extruding
methods have higher density and low resistance rate. Higher welding resistance
and uniform arc erosion than internally oxidized material with same composition.

AgNi contact sheet:
AgNi contact material containing 10% to 40% Ni. It produced by powder metallurgical
production have low and stable contact resistance, high hardness and mechanical
strength. The material transfer in case of DC is very small. So it is high electrical
and thermal conductivity. The contacts have very low arc erosion. On making
higher current normally asymmetric pairs with AgC contact materials is applied.
Wire of solid and composite rivets produced by powder sintering-extruding methods.

AgSnO₂ is the ideal material of AgCdO instead of material and has excellent properties of contacts. As the thermal stability of SnO₂ is higher. AgSnO₂ has higher. AgSnO₂ has higher resistively against welding and low are erosion than AgCdO material, and is poisonous-less. For AgSnO₂ contact material, the contact resistance can be controlled within the limited range by putting in a small of amount of additive of special metal-oxide. It is a activity developed and recommended new contact material in the world. In this aspect contact materials produced by powder metallurgy processing method have higher resistance against arc erosion and less arc bumming than those produced by intimae oxidation processing method.

AgZnO contact sheet:
The higher thermal stability of ZnO in AgznO contact material, the welding resistively
and resistively against arc erosion is also higher. AgZnO contact material
is poisonous-less will not pollute the environment will cause higher contact resistance
this problem can be solved by increasing the contact strength by powder
metallurgy processing method have higher welding resistively and low arc erosion
with strong magnetic arc blowing under large switching capacity than those produced
by internal oxidation processing method. AgZnO contact material is most suitable
to be used in contactors and circuit breakers with large capacities.