1 Channel Passive Video UTP Transmitter and Receiver

Specifications

1.Transmit and receive video signals over UTP cable
2.Long-distance transmission, quality images;
3.Three-year warranty

1Channel Passive Video UTP Transmitter and receiver

 

1. PRODUCT Overview

This product is used to transmit and receive video signals over UTP cable. The UTP transceiver converts video signals into differential signals for transmission over UTP cable, and then the receiver converts the received differential signals into video signals. It is of excellent performance in suppressing common mode interference so that clear image signals are produced in environments of strong interference.

2. Application Field

This product is widely used in the fields of security, education, and logistics, etc. where high-definition AV signal transmission is needed.  It can transmit colored and monochrome baseband video signals of PAL, NTSC, SECAM, etc.. Its advantages are strong anti-interference capability, long distance transmission, low price, and easy line-fixing, etc..

3. PRODUCT CHARACTERISTICS:

1. Long-distance transmission, high quality images. Advanced processing technology is employed to amplify and compensate for video signal amplitude and attenuation of different frequencies so that the luminance and chrominance and real-time of original video signals can be maintained, without distortion even in long-distance transmission.

2. Easy line-fixing, high utilization of UTP cable. One pair of telephone line can transmit video signals. Any pair of the four pairs in CAT5 of UTP widely used in buildings can be used for transmission, without new line-fixing; line-fixing of UTP is also easier than that of coaxial cables. There are 4 pairs in one CAT5 UTP, if one pair is used to transmit video signal, other pairs can transmit audio signal, control data, power supply, and other signals, thus the cable utilization is raised and troubles of fixing separate lines for different signals are avoided and project costs reduced.

3. Strong anti-interference capability. UTP transceiver can restrain common-mode interference in environments of strong interference. The different pairs in one UTP transmit different signals, and these signals do not interfere with each other.

4. High reliability and easy operation. There is no need for professional knowledge for installation and operation. Once installed, this device will work in a long period.

5. Wide range of power supply: AC/DC 12V-24V; transient suppressive protection function

Technology Specifications:

Type

1V (Passive)

4V 1D V1

8V (Passive)

8/16/32V (Passive) 19”1URack

1V (passive)

1V 1D 1A

4V (Active)

8/16/24V (Active) 19”1U rack

Video

Frequency response range: DC-8MHz; common-mode rejection/Differential Mode Rejection Ratio: 15KHz-8MHz  60dB(typical value)

Wire Type

Class 3 or above wire(0.48-1.31mm); DC loop resistance of each wire core pair<18Ω/100m, Differential capacitance<62pF/m

Impedance Feature

Twisted wire, binding post or RJ45: 100Ω; Video BNC or coaxial cable: 75Ω

Power

/

/

/

/

AC-DC 12-24V<80mA

12V<300mA

AC 100-240V  50/60Hz

Transient Protection

/

/

/

/

6KV  10/700us  IEC61000-4-5 (ground benigh)

Volume (mm)

47X15X16

81X82X29

120X78X32

432X97X44

81X82X29

81X82X29

120X97X32

432X97X44

Weight(g)

C-20; L-16

100

210

1010/1110/1310

88

120

220

1200/1320/1500

Working Environment

Temperature Range(-20~60°C)

Relative Humidity Range(0~95% non-condensing)