Rod Dual Spooler Model SGS800/1600

Specifications

This machine is applicable to coiling aluminum and/or aluminum alloy rod for continuous casting and rolling line (CCR).

Dual Rod Coiler Model SGS800/1600

 

1. Name and Model

Dual rod coiler SGS800/1600

1. Application

This machine is applicable to coiling aluminum and/or aluminum alloy rod for continuous casting and rolling line (CCR).

1. Main Technical Parameters

 

1	Rod diameter (mm)	φ9.5, φ12
2	Take-up speed (max)	7m/s
3	Size of coil (mm)	φ780×φ1520×780
4	Weight of coil (kg)	2200
5	Overall dimension (m)	18.5×7.5×4.1

1. Description

This machine is used as a compact coiler to continuous casting and rolling line for aluminum and/or aluminum alloy rod, from which a coil of rod without a basket is produced. It’s capable of taking up aluminum rod or aluminum alloy rod from diameter φ9.5~φ12mm at a speed of 7m/s. It’s composed of cooler, shears, divider, scrap drive unit, scrap rod collecting rack, guide groove, dual rod coiler, pneumatic system, and electric control.

As a compact coiler, it’s capable of changing the reel automatically without causing the rod tangled. It’s equipped with forced cooler to prevent sharp difference of temperature between the inner coil and the outer coiler that affects the quality of the aluminum rod, particularly aluminum alloy rod. The shears work not only to cut off the rod at the time of changing the reel, but also cut the waste rod into short sections in case of fault or inferior quality of the rod during the casting and rolling process. Then it guides the waste rod into the material stacking basket via the divider and the waste rod guide; the divider guides the rod to the waste rod drive unit or the guide groove; the guide groove connects the divider with the rod coiler and guide it to the rod coiler. Once the rod coiler completes a coil, it straps the coil and pushes it off the reel.