Embosser Machine

Specifications

Manual embossing machlne is the necessary equipment at the end of the process of producing PVC card ,

I)       Product  introduction

Manual embossing machlne is the necessary equipment at the end of the process of producing   PVC card , This device , which is used to press out the outstanding letter of alphabet and numerals  on the surface of PVC card , makes PVC card to be identified or exclusive. The manual and  electric type of the machine on the market is two kinds of ,Manual machine is cheaper and easier  to use , so medium and small companies of producing card use it .

ME--A  PVC manual embossing machine is a new style machine ,which integrates traits of  a variety of congener, machines, developed by engineers of our company.

ME--A  PVC manual embossing machine has characteristics of reliable structure , accurate  orientation, small bulk, laconic exterior, convenient operation and so on , lt suits for the production  of small lot and many varieties cards in many industries, such as market , center of amusement   and dining , stock certificate bargain center, bank and the insurance etc .

II) The  main  Specification

1.  Characters selector: Daisy characters plate .

2.  Standard Characters:

      26  Letters:

                A B C D E F J H I J K L M N

                O P Q R S T U V W X Y Z

      20  Numerals: 

                0,1,2,3,4,5,6,7,8,9

                0,1,2,3,4,5,6,7,8,9

      20  Symbols:

3.  Characters:   All  characters  are  corresponding

                          with ISO  standard.

4.  Embossment  pitch: 1/7inch  or  1/10inch

5.  Operation:  Manual

6.  Embossment  line: 1-11  Lines

7.  Embossment  indicator: Pin  point  and  sample

                                            card

8.  Dimensions L×D×H339×269×165 (mm)

IV) Operating   steps

1.  Put he card in the card frame and fix it .

2.  Move the frame and choose the position what you need .

3.  Writhe the daisy characters plate, use the pointer to choose the characters you need .

4.  After doing step 1~3 , jolt the hand-haft .

5.  If the embossment depth is not fit what you need , you can adjust the bolt in adjusting hole at  the bottom of machine.You can Use 4th inner hexagon spanner to untie the bolt , and then  use 8th outer hexagon spanner to untie outer bolt , After adjusting , please screw the bolt .

V) Attentions

1.   Please use the PVC card  (85mm×55mm),mental and un-normal cards are strictly  forbidden to use.

2.   In order to prevent machine from reformatting, it's forbidden to jolt hand-haft when  writhing the daisy characters plate.

3.   Notice the location of pointer when switching embossment size, if you want to switch ,  please ward off the card frame slightly to avoid card frame moving by itself.

4.  It is strictly forbidden to put hand and other hard objects into machine.

5.  Please move the card frame to the left end (opposite direction of the hand-haft) when not  using the machine.