Log Transport trailer,log carrier truck,wood transportation truck

Log Transport Trailer

The Truck model configuration is as follows:

1.Front part:

Chassis Selection: SINOTRUK (chassis assembly 90 # kingpin seat)

Upper parts: the selection of sub-frame rails reinforced, 16 materials, channel beams, channel steel sub-frame in the middle using the channel to buckle under the crossbar beams, front, back end and a U-shaped bracket. The front plate member 16 welded channel #. Tires at the circular pipe. Front plate with 6mm thick plate, front floor thickness 4mm. Within the U-shaped frame width 2420mm, the high 1450mm, the bottom of a 16-manganese material rectangular tube. Both sides of the insert pile using channel buckle with rope limit. Enhanced dial. The bottom of the pin connections. Strengthen the tail, the installation of bell-style trailer hitches. Modified tractor and tank protection fence on both sides of the installation of the platform ladder, on both sides of the front panel to install the spare tire rack (2 and 2 matching 0.5 tons chain hoists) spare tire rack side loading and unloading spare rotary lifting methods.

2.Artillery section:
Stringer is enhanced, front and rear blocking plate use 18mm steel plate (Q345). The word rack rails between the front frame beams, using 11.00R20 tires Triangle, no spare tire. 32-ton axle low platform, enhanced turntable, connecting pipe diameter 180mm, wall thickness of 10mm, through the pin spacing, set up spacing holes. U-shaped frame and wheel bolt connections on both sides of the column with limit rope, the column is foldable. Towbar total length 8 m. Has a circuit, gas connection pipeline. Trailing only the installation of a combination of lights, with LED type. Stringer stiffeners fitted at both ends.