Good quality magnetic strip spot welding machine

Good quality magnetic strip spot welding machine

Function introduction:

 Coiled magnetic strip can be mounted on the PET or PVC film or sheet material when the recycling system will recycle the magnetic strip foil. After the mounting finished, cutting it into prearrange length. The magnetic strip can be mounted and cut synchronously. The whole process finished automatically,with stable working condition.

Range for apply material:

Coil film:Thickness:0.04-0.2mm.

Sheet:Thickness:0.25-0.8mm.

Function and Feature:

1. The system is automatically controlled by PLC and operated on touch screen human-machine inter face.

2. Feed sending by driven servo-motor, which controls running speed and the length of the feeding film both speed and length are adjusted.

3. Several groups roller impact the structure, the pressure of the cylinder can be adjusted to insure the covered film is parallel and orderliness.

4. The motivity for the film cutting is driven by cylinder, with simple structure and good working state.

5. The recycling system recycles the magnetic stripe foil automatically.

6. Use barometric pressure spindle material loading and unloading system, it is convenient to load and upload material.

7. Heating temperature controlling method:use the heater to heat up and the imported thermocouple cooperating with temperature controller to control the temperature,it is easy to set and the temperature controller is precise.

8. The temperature and pressure of each magnetic laying head can be adjusted solely.

9. Use automatic tension control system to send feeds, so that conveying of film can be stable.

10. It realizes the processing of coil film to sheet material or sheet material to sheet material stripe laying.

Technical parameter:

WUHAN JIA QIRUI CARD TECHNOLOGY CO.,LIMITED

http://cnjacky-rfidcard.en.china.cn/
Tel:86-27-82300688 
Fax:86-27-82340460
Phone : 008618672319599
Skype: sales_ 
QQ: 2632940654