LDPE/HDPE film blowing machine with rotary die head and double manual winder

LDPE/HDPE film blowing machine with rotary die head and double manual winder

Features:

The machine is used to produce the mulch plastic film, agricultural film and outer package film made of LDPE, LLDPE and LLDPE. It employs some new technologies like the most advanced heat running technology and special wind ring that used to extrude the shaped mulch plastic film. The machine is designed reasonably and elegantly. It is small and is easy to operate and maintain. The product features with good plasticization, high physical and technology and reasonable accessories, the machine is featured by high output, low energy consumption, good stability and reliability etc. Therefore, it is the ideal equipment to agricultural mulch plastic film in the new century.

Model: SJ65-FMS1500N

Main Technology Parameters:

1) LAYER NUMBER: one layer

Max Folded Film Width: 1400mm(LDPE), or 1300mm(HDPE)

Film Thickness: 0.02~0.20mm(LDPE), or 0.015~0.12mm(HDPE)

Raw Material: LDPE, LLDPE(or HDPE)

Max. Output: about ~80kg/h(HDPE)

2) EXTRUDER:

Screw Diameter: Φ65mm

Screw L/D: 30:1

Screw material: 38 CRMOALA

Cylinder material: 38 CRMOALA

Heater Capacity: ~16.5kw

Driving Motor: 37kw (controlled by Inverter)

3) DIE:

Die Diameter: LDPEΦ350mm(or HDPE Φ90, Φ120mm)

Heater Capacity: 9.95KW(LDPE), or 6.1KW(HDPE)

Cooling Air Blower: 5.5KW

4) HAUL-OFF:

Driving Motor: 2.2 KW

Take-up Speed: 10~ 50 m/min

Winder Driving Motor: 4.4kw

Temperature Control: 6units

Whole Power of the machine: About 80KW

Shape Size: (L x W x H) 6.7X3.2x7.0m

Weight: About 5200KG

5) Voltage: 380V, 50HZ(or 220, 60HZ)