Electronic Kafuter K-5213 Heat Sink thermal dry powder paint

Specifications

dry powder paint
1.grey gel
2.high thermal conductivity: 3.0
3.seal in high-power LED lights
4.1KG/jar

      

      Electronic Kafuter K-5213 Heat Sink thermal dry powder paint

 

 

 

Features

High thermal conductivity up to 3.0 and electrical insulation.

Long working temperature (-50°c ~ 200°c)

Great stability and flowability, easy to use

No toxic or corrosion, tasteless, and not dry or dissolve

 

Application

1. Dissipate the heat and reduce its working temperature

2. Filling and coating in electronics, electrical appliances and components.

3. Potting the gap between CPU and radiator,  in  high-power tri-tube, controlled silicone components,

4.Coating the gap between diode with aluminum or cooper substrates

5.Coating a thin gel between trial power amplifier tube and thermal fin, or refrigerator of semi-conductors

 

 Apply in bonding and sealing in  LED bulbs, high-power LED street lights, mine lights, and other lights or lamps which requires high thermal conductivity

 

Properties

 

Product Name	K-5213
Appearance	grey paste
Penetration(1/10mm,25°C)	260~300
Proportion(g/cm3)	2.5~3.0
Freeness(%.200°C,8h)	≤1.0
Volatility(%.200°C,8h)	≤1.0
Breakdown Voltage Strength(kV/mm)	≥10
Volume Resistivity(Ω.cm)	4×1014
Thermal Conductivity(w/m.k)	≥3.0

 

 

 Usage

 

First, clean the coating surface by removing the oil and grease.

 

 Second, squeeze out the grease directly coating into the uncoated surface with a thin layer. have brushing, scraping, or roll coating ways.

 

 Third, the surface should coat evenly by filling the whole gap with a fully thin layer. but make sure not coat too much on the surface

 

 

 

 1kg/case 

 

 Shelf Life:one year

 

Store in dry and cold place 

 

Deliver Date: About 3~7 days after receiving your payments.