Home office Led panelen Led Paneel 60*60cm

Specification of led panel 2x4 ft :

 Application of led panel  :

1.offices,conference rooms,metting romms,factories

2.Residential lighing:living romms,bedroom

3.Commercial lightin:hotesl,shops,stores

4.Shcools,colleges,universitis,hopitals

Light Source Test Report

Wire connection photos

Installation of led panel 60x120 cm

A.recessed installation
1.  cut a hole with suitable size on the ceiling, and set the T-shape keel beam in advance(please refer to the products cut hole
size table);
2. make the lamp house installed in the hole, then connect the electric supply L,N electrodes to the related Led controllers' L, N.;
3. set the lamp body steadily on the T-shape keel beam, turn on the power;
Attention: if your T-shape keel beam cannot be able to bear the lamp's weight or any other risks, please add the steel ropes to guarantee
the installation’s stable.

B.surface mounted installation
1. set the steel ropes fixed on the ceiling.
2. set the steel steel ropes connected to lamp house stability, then adjust the rope length to make the lamp house on horizontal position.
3. connect the electric supply L,N electrodes to the related Led controllers' L, N.
4. turn on the power
Attention: The led light source cannot to be replaced, please do not open the lamp body or unscrewed the screws among the LED light source, or
the heating performance of the LED light source will be influenced, make the lifespan shorter, even the led burnt.
Caution:the lamp body cannot be able connected to the AC Commercial power directly, must via the led controller to supply.

 Aging test picture: