460 Tamping plant for wind-proof and dust control

Plate picture:

1.Technical specification

Size: 8900mm × 2250mm × 2300mm

Total Weight: about 14KG

Main Motor Power: 18.5KW forming power is 7.5kw ; bending power is 4.0kw; cutting power is 4.0kw; conical power is 3.0kw

Working Speed: Straight sheet: 15m/min

Arch sheet: 13m/min

Sewing: 6m/min

Material of rollers: 45# steel, quenched HRC 58-62

Material of roller shafts: 45# steel, quenched HRC 58-62

Material of cutting blade: Cr12 steel (Taiwan Airline Technique)

Step of rollers: 14 steps

Feeding Width: 914mm

Effective Width: 610mm

Thickness of the coil: 0.8-1.5mm

Gear/Spoket driving: 13 stations to form

Electric Standard: 380V / 50 HZ / 3 PHASE

Type of cutting: Roll-formed and length-set cutting

Ship Container: 40HC x 1

Operating factor of the panel: 66%

Proper span: ≤38m

PLC Type:OMRON, Japan

2.machine chart

3.Components of line:

(1)man-made uncoiler (max capacity 5000kg)

(2) Roll-Forming:

Steps:10-11steps Roller Material: 45# steel

Voltage: 3phase/80V/50-60Hz. line speed:8-10m/min;

Rolling chromium thickness:0.05 mm

(3) blade

It adopts hydraulic drive and automatic location to decide the dimention and cut the target products.

Match equipment : one set of cutting tool, one hydraulic tank ,one cutter machine.

Stop to cut , Post cut cutting length tolerance: ±2mm

Cutting tool material: GCr12 with quenched treatment 60-62°C

(4) Hydraulic System

It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.

Match equipment: a set of hydraulic tank , a set of hydraulic oil pump, two hydraulic pipes and two sets of electromagnetism valves.

(5)control system :

It adopts PLC to control. The target piece length is adjustable and digit of it can be adjusted

Computed mode has two modes: automatic and manual one.

(6) receiving table:

1. T/T , L/C 2. 30% Advanced pament first and the lest paid after received loading bill copy.

All the packaging of machine above can be arraged as customers' requirement.