AAC making plant price / aac machine plant (Tianyuan brand)

AAC Block plant( Tianyuan brand)

1. Advantages - Tianyuan AAC Block:

Being light-weight AAC drastically reduces the building load, resulting into reduction in steel( up to 27%) and cement(up to 20%) structural cost saving. Being 8times the size of a clay brick, AAC wall construction involves 1/3 the joints, thus saving mortar up to 66%.

2. Introduction- AAC Block Plant

Autoclaved Aerated Concrete (AAC) Block, also called Light-weight Block. Use silicate (fly ash/sand/slag) and calcareous (lime & cement) as the main raw materials, which through the process of batching, pouring, curing, cutting, hardening, separating and packing made into the AAC BLOCK. 

3. AAC plant(tianyuan brand) Planning and design:

 Factory covers an area of 6000~30000m2.(workshop at about 1800~3000m2)

 Including raw material area, finished block area and production area. 

Production flows includes raw material processing, rated material pouring, foaming, cutting and hardening procedure.

4. AAC Aerated Autoclaved Concrete block plant(Tianyuan brand) Material:

1). Coal Flyash or Sand or Quartzite

2). Cement

3). Lime, gypsum and aluminum powder (buy at local area)

4). Water

5. Water, electricity and steam supply:

1). Water supply: from well or use waste water 

2). Electricity supply: install a 350~800KVA transformer 

3). Steam supply: install a 4~8tons boiler to supply steam to autoclave and curing room

6. Advantages and Features of AAC block : 

We produce according to PRC standard GB11968-1997 Aerated Autoclaved Concrete Block Technology. 

1). Capacity category: 500, 600, 700kgs/ m3 (namely 3.5, 5.0, 7.5 Grade)

2). Compression strength level: 3.5, 5.0, 7.5Mpa (namely 3.5, 5.0, 7.5 Grade)

3). Drying shrinkage: less than 0.8mm/m

4). Thermal system: 0.11-0.22kcal/m.h.c

5). Sound insulation value: 47.45db

6). Frost resistance: 35.

7). Water absorbity :20.

8). Fire resistance: >4h, 200mm and up >8h.

7. AAC block Specification 

Length: 600mm Width: 100/ 125/ 150/ 200/ 250/ 300mm Height: 150/ 200/ 250/ 300mm

8. Main technical parameters

a*. Product density should be controlled around 650kgs/m3

b*. Annual production capacity: 100,000~300,000 m3

c*. Material ratio: cement 5-8%, lime 15-18%, flyash 75%(sand 60-70%), gypsum 4-5%, aluminum powder 500g/m3

d*. Water/material : 0.63:1

e*. 3.06m3/mould.

f*. Pouring time 5-6mins; temperature at 38-42degree.

g*. Cutting period: 3 minutes

h*. Curing time: 1.5-2.5 hours at 45-60°C

i*. Autoclave: 6hours(sand 10hours)

9. Market Analysis

AAC is becoming more and more popular in the building markets, from western to developing area. Below Properties make AAC have unmatchable property, especially for high buildings:

1*  Extreme Light Weight

2* Large Variety of Sizes

3*  High Fire Resistant

4*  Excellent Thermal Insulation

5*  Sound Insulation

6*  Moisture Protection

7*   Frozen Resistant

8*  High Workability and Easy Processing.

10. Cement/lime/fly ash AAC block material ratio:

11. AAC machine pictures.